Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-01-2019, 08:03 PM | #1 |
Registered User
Join Date: Nov 2018
Location: Fort Myers FL
Posts: 82
|
What is everyone’s favorite rust encapsulator?
I have used Bill Hirsch miracle paint and Por 15 in the past with varying success. I really want to coat hard to get areas and floors in the Blazer I’m doing. Any reviews would be greatly appreciated.
|
03-02-2019, 05:05 PM | #2 |
Senior Member
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,956
|
Re: What is everyone’s favorite rust encapsulator?
I’ve used por 15 as well. Seems to last if prepped correctly. I’ve heard it doesn’t hold up to sunlight without a topcoat.
__________________
Kirk 72 Blazer CST 4wd highlander |
03-02-2019, 09:38 PM | #3 |
Registered User
Join Date: Nov 2018
Location: Fort Myers FL
Posts: 82
|
Re: What is everyone’s favorite rust encapsulator?
That is very true, no UV protectant. I found out the hard way here in sunny south Florida.
|
03-03-2019, 05:04 PM | #4 |
Registered User
Join Date: Nov 2017
Location: Portland, Tn
Posts: 6
|
Re: What is everyone’s favorite rust encapsulator?
I used rust x about a year ago on a frame. So far, so good but the truck has been kept inside too.
|
03-03-2019, 09:51 PM | #5 |
Registered User
Join Date: Nov 2018
Location: Fort Myers FL
Posts: 82
|
Re: What is everyone’s favorite rust encapsulator?
Thanks, I’ll look into that.
|
03-04-2019, 11:03 AM | #6 |
Registered User
Join Date: Jan 2017
Location: Carmichael, CA
Posts: 91
|
Re: What is everyone’s favorite rust encapsulator?
I've used with excellent success "Rust Bullet." As long as the metal is sound (i.e. large chucks of rust scale and dirt are removed with a scraper or wire wheel), I have not had it fail on any rust repair. It is nasty stuff. Once you open the can you have to use the whole can.
|
03-04-2019, 05:23 PM | #7 |
Registered User
Join Date: Nov 2018
Location: Fort Myers FL
Posts: 82
|
Re: What is everyone’s favorite rust encapsulator?
Thank you for the review. I have never heard of it and will look into that. That’s what I found out with miracle paint if you didn’t use it all at one shot. If you put the lid back on you can’t ever get it back off. So what I have done to combat that is put kitchen plastic wrap over the can and put the lid back on.
|
03-04-2019, 06:07 PM | #8 |
Senior Member
Join Date: Dec 2006
Location: Studio City, Calif.
Posts: 2,886
|
Re: What is everyone’s favorite rust encapsulator?
Here's good reading, although I don't have much experience here in calif.
https://garage.eastwood.com/eastwood...-vs-converter/ On the ships we used to just "pin-hole" the heavy rust with little pointed hammers and then apply phosphoric acid directly on after that. Did that help? I didn't think so, just running my fingers.
__________________
'69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme. |
Bookmarks |
|
|