What did you do to your truck today.The 3rd chapter - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Metaldoc · 03-06-2019, 01:23 PM

Quote:

Originally Posted by 66clow

Never ending sanding and body work. 😭

Confucius say " Paint job is only as good as the prep job."

cornerstone · 03-06-2019, 05:19 PM

Quote:

Originally Posted by zicc1835

maybe you and I are refering to the same thing Im talking about the blue apparatus you can barely see inside the bed , I have one that lifts the cab that you attach to the engine hoist(i have successfully moved my cab solo) Im wondering if there is something you can use to put inside the bed to lift with no damage ....looks like thats what he did/has /used??

This is what I used in conjunction with the hoist. It was 89 bucks through Northern tool.

Metaldoc · 03-06-2019, 06:11 PM

No more hand cranks P/W and P/L done

**zicc1835** · 03-06-2019, 09:28 PM

Quote:

Originally Posted by cornerstone

This is what I used in conjunction with the hoist. It was 89 bucks through Northern tool.

very much appretiate your response Auto Body Tool Mart has them for 300.00 + didnt want to spend that much
thank you

BugzC10 · 03-07-2019, 10:28 AM

Quote:

Originally Posted by Metaldoc

No more hand cranks P/W and P/L done

Nice and clean....were are the window & lock switchs mounted?

Metaldoc · 03-07-2019, 11:27 AM

Quote:

Originally Posted by BugzC10

Nice and clean....were are the window & lock switchs mounted?

Micro switches that control relays

Chris_oz · 03-07-2019, 02:18 PM

Not so much to the truck....For the truck

20' wide x 30' long and 12'6" high under rafters.

Enough room for a 4 post hoist and the Chev

Roof and wall sheets go on this weekend if its not raining.

weq92f · 03-07-2019, 09:52 PM

.
Cap, rotor and plug wires...

**SlowGreen71** · 03-08-2019, 09:29 PM

Shortened her up a little and changed over to 73-87 style engine mounts. Still need to finish welding the inner sleeve and smoothing the cuts for the motor stands but it’s all in.

89AKurt · 03-08-2019, 10:48 PM

I took my "new" truck to the mechanic to check all the fluids, and look over everything. When the differential oil came out, I heard "oh $#it". So I took pictures today.

cornerstone · 03-08-2019, 11:21 PM

Quote:

Originally Posted by 89AKurt

I took my "new" truck to the mechanic to check all the fluids, and look over everything. When the differential oil came out, I heard "oh $#it". So I took pictures today.

Is it trashed or can the spacer just be pushed in and make sure the tolerances are all in spec??
Nevermind, I found the answer on your personal thread... Thats a bummer.

rjs53 · 03-08-2019, 11:29 PM

Quote:

Originally Posted by SlowGreen71

Shortened her up a little and changed over to 73-87 style engine mounts. Still need to finish welding the inner sleeve and smoothing the cuts for the motor stands but it’s all in.

Nice job!

89AKurt · 03-08-2019, 11:29 PM

Quote:

Originally Posted by cornerstone

Is it trashed or can the spacer just be pushed in and make sure the tolerances are all in spec??

Yea, he just pushed it back in.

Sorry, couldn't resist. It was all taken apart, cleaned, new bearings, seals, and new brakes shoes because what was on was cracked, and all new spacers. I posted a series of photos on my thread.

BugzC10 · 03-09-2019, 10:35 AM

Quote:

Originally Posted by 89AKurt

I took my "new" truck to the mechanic to check all the fluids, and look over everything. When the differential oil came out, I heard "oh $#it". So I took pictures today.

Bummer...could you hear the rear end singing when you drove it?

89AKurt · 03-09-2019, 11:17 AM

Quote:

Originally Posted by BugzC10

Bummer...could you hear the rear end singing when you drove it?

Not really, the transmission makes noise, there was water in the oil but no metal. Yes, when I was going downhill and turning right around curves, it howled. As you can see, the pinion gear was hitting the carrier (correct the terms if I got it wrong).

Here is a short video (on Facebook, sorry), showing how loose it was.
https://www.facebook.com/10000846199...4929899799056/

**RodnRudy** · 03-09-2019, 07:51 PM

Yanked the engine out of Old Red today to hopefully solve a vibration problem I've had since I put the crate GM engine in 10000 miles ago. I'm going to have it bored 30 over and put new pistons, rods and have everything balanced.

bad6772 · 03-09-2019, 09:16 PM

Got my Final Mock up done...hope to get her back in an plumbed mid week...

BugzC10 · 03-10-2019, 03:33 PM

Got her a blankie....

siggyfreud · 03-10-2019, 03:54 PM

Quote:

Originally Posted by Metaldoc

Micro switches that control relays

What products did you use for the windows and doors? I see someone on this forum used to make a 67-72 specific power door lock kit, but they don't appear to be around anymore.

Metaldoc · 03-10-2019, 06:35 PM

Quote:

Originally Posted by siggyfreud

What products did you use for the windows and doors? I see someone on this forum used to make a 67-72 specific power door lock kit, but they don't appear to be around anymore.

The windows were 91 chev truck motors and the lock are swap meet. All the switches and relays are hobby store. My own design beyond that.

Metaldoc · 03-10-2019, 06:45 PM

Painting the inside of the hood to finish the engine bay

fdbdw · 03-10-2019, 10:12 PM

Dumped my sniper EFI back to carb, so glad to be done with that POS. Starts and runs every time now.

Abomb · 03-10-2019, 11:18 PM

Well, the new project spent a full week in my shop, new wheels cylinders, hoses and shoes, new heater core, new thermostat and water neck, new pressure and temp gauges, new choke cable, new exhaust hanger, carb cleaning...I was really hoping to drive it to work tomorrow, but couldn’t get the brakes to gravity bleed...so, it’ll have to wait until I can get my 14 year old son to come down for a leg work out while I bleed the wheel cylinders.

**71CHEVYSHORTBED402** · 03-11-2019, 12:30 AM

Polished this up with Pro Honda. Comes in a spray. Beyond my expectations, it took out some tuff areas with ease. I could brighten it up some more, but why bother. May have painted it, they look amazing painted, but seems they "breathe" easier without it.

$1550 to have this rebuilt. It's shifted smooth since the day I got it, but 140K miles, and an occasion of abuse

, it was due.

cornerstone · 03-11-2019, 01:06 AM

I finished welding up the unnecessary holes in the firewall and started the body work. Now I get to learn firsthand why everyone gets sick of sanding.

03-06-2019, 06:11 PM	#328
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today.The 3rd chapter No more hand cranks P/W and P/L done Attached Images __________________ Do it, Do it right, Do it right the first time

03-07-2019, 02:18 PM	#332
Chris_oz Registered User Join Date: Sep 2018 Location: Newcastle, New South Wales, Australia Posts: 139	Re: What did you do to your truck today.The 3rd chapter Not so much to the truck....For the truck 20' wide x 30' long and 12'6" high under rafters. Enough room for a 4 post hoist and the Chev Roof and wall sheets go on this weekend if its not raining. Attached Images

03-07-2019, 09:52 PM	#333
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,223	Re: What did you do to your truck today.The 3rd chapter . Cap, rotor and plug wires... Attached Images __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold Last edited by weq92f; 03-07-2019 at 09:59 PM.

03-08-2019, 09:29 PM	#334
SlowGreen71 Junior Member Join Date: Dec 2017 Location: vader, WA Posts: 57	Re: What did you do to your truck today.The 3rd chapter Shortened her up a little and changed over to 73-87 style engine mounts. Still need to finish welding the inner sleeve and smoothing the cuts for the motor stands but it’s all in. Attached Images

03-08-2019, 10:48 PM	#335
89AKurt Registered User Join Date: Dec 2015 Location: Prescott Arizona Posts: 621	Re: What did you do to your truck today.The 3rd chapter I took my "new" truck to the mechanic to check all the fluids, and look over everything. When the differential oil came out, I heard "oh $#it". So I took pictures today. __________________ 1968 Long Bed 2016 Honda Civic Coupe EX-T ticket magnet

03-09-2019, 07:51 PM	#341
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 932	Re: What did you do to your truck today.The 3rd chapter Yanked the engine out of Old Red today to hopefully solve a vibration problem I've had since I put the crate GM engine in 10000 miles ago. I'm going to have it bored 30 over and put new pistons, rods and have everything balanced. Attached Images __________________ Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net

03-09-2019, 09:16 PM	#342
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: What did you do to your truck today.The 3rd chapter Got my Final Mock up done...hope to get her back in an plumbed mid week... Attached Images

03-10-2019, 03:33 PM	#343
BugzC10 Registered User Join Date: Oct 2012 Location: Rose Hill Kansas Posts: 1,351	Re: What did you do to your truck today.The 3rd chapter Got her a blankie.... Attached Images __________________ 1970 C10 Short Stepper with 71/72 front clip.

03-10-2019, 06:45 PM	#346
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today.The 3rd chapter Painting the inside of the hood to finish the engine bay Attached Images __________________ Do it, Do it right, Do it right the first time

03-10-2019, 10:12 PM	#347
fdbdw Registered User Join Date: Jan 2009 Location: colorado springs Posts: 479	Re: What did you do to your truck today.The 3rd chapter Dumped my sniper EFI back to carb, so glad to be done with that POS. Starts and runs every time now. Attached Images

03-10-2019, 11:18 PM	#348
Abomb Registered User Join Date: Feb 2019 Location: Oberlin Posts: 92	Re: What did you do to your truck today.The 3rd chapter Well, the new project spent a full week in my shop, new wheels cylinders, hoses and shoes, new heater core, new thermostat and water neck, new pressure and temp gauges, new choke cable, new exhaust hanger, carb cleaning...I was really hoping to drive it to work tomorrow, but couldn’t get the brakes to gravity bleed...so, it’ll have to wait until I can get my 14 year old son to come down for a leg work out while I bleed the wheel cylinders.

03-11-2019, 12:30 AM	#349
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,324	Re: What did you do to your truck today.The 3rd chapter Polished this up with Pro Honda. Comes in a spray. Beyond my expectations, it took out some tuff areas with ease. I could brighten it up some more, but why bother. May have painted it, they look amazing painted, but seems they "breathe" easier without it. $1550 to have this rebuilt. It's shifted smooth since the day I got it, but 140K miles, and an occasion of abuse, it was due. Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

03-11-2019, 01:06 AM	#350
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: What did you do to your truck today.The 3rd chapter I finished welding up the unnecessary holes in the firewall and started the body work. Now I get to learn firsthand why everyone gets sick of sanding. Attached Images __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.