Front Roll Pan Frame Measurement

[69GMC2004]

Wondering if anybody can get me a measurement of where they had to cut the front of the frame in order to install a roll pan? I'm thinking a measurement from the forward most part of the rad support bracket would be easiest to work with, pictures are a bonus. Would like to get the frame fully prepped before sending it out for powder coating.

Thanks in advance.

[ga-stepside]

Originally Posted by 69GMC2004

Wondering if anybody can get me a measurement of where they had to cut the front of the frame in order to install a roll pan? I'm thinking a measurement from the forward most part of the rad support bracket would be easiest to work with, pictures are a bonus. Would like to get the frame fully prepped before sending it out for powder coating.

Thanks in advance.

I cut mine 3" from the radiator support bracket. This gave me about 1/2" clearance to the pan. The two holes in the support bracket are for a couple bars I am adding just for a bit of protection.

[69GMC2004]

Originally Posted by ga-stepside

I cut mine 3" from the radiator support bracket. This gave me about 1/2" clearance to the pan. The two holes in the support bracket are for a couple bars I am adding just for a bit of protection.

Thank you much! It is greatly appreciated.