|
03-26-2019, 08:45 PM
|
#1 |
|
Registered User
Join Date: Oct 2016
Location: elizabethton tn
Posts: 7
|
64 rear axle bearing
Hello all, 2 questions. on my rear axle bearing it has a washer behind it which repair manual calls it a bearing retainer and says to replace when replacing the bearing, but can't find them anywhere, any advice. Next, one bearing i was able to pull it out with my hand the other had to use bearing puller, anyone got a clue on that. tks for any help.
|
|
|
|
03-27-2019, 01:07 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 64 rear axle bearing
Are you working on a 12 bolt or a Dana 44?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-31-2019, 04:19 PM
|
#3 |
|
Registered User
Join Date: Oct 2016
Location: elizabethton tn
Posts: 7
|
Re: 64 rear axle bearing
12 bolt
|
|
|
|
|
03-31-2019, 08:18 PM
|
#4 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: 64 rear axle bearing
The 64 12 bolt uses a somewhat special wheel bearing as I remember. The 12 bolt truck bearing that was sent with my rear end "kit" was not correct for that year. I would have to be in Texas to get that info though.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
04-05-2019, 11:39 PM
|
#5 |
|
Registered User
Join Date: Oct 2016
Location: elizabethton tn
Posts: 7
|
Re: 64 rear axle bearing
Had to drive the new bearings in, not sure what was going on.
|
|
|
|
|
04-06-2019, 11:35 PM
|
#6 | |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 64 rear axle bearing
The axle bearings are supposed to be a tight fit into the ends of the axle tubes.
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
|
04-07-2019, 09:02 AM
|
#7 |
|
Registered User
Join Date: Oct 2016
Location: elizabethton tn
Posts: 7
|
Re: 64 rear axle bearing
yes i know they are suppose to fit tight, but can not figure out why old one was so loose. thanks for all input..BY the way captain i switched my 64 to 700r4 auto and i still run the 6 cyl with 1 barrel do you know where i could find a bracket for the kickdown cable,
|
|
|
|
|
04-07-2019, 09:38 AM
|
#8 |
|
Registered User
Join Date: Feb 2017
Location: Munich Germany
Posts: 15
|
Re: 64 rear axle bearing
the 63 and 64 outer rear wheel bearing are different to the other year 12 bolt bearings-they have the press on backing plates and different size bearing
|
|
|
|
|
04-07-2019, 10:11 AM
|
#9 |
|
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: 64 rear axle bearing
Maybe 63 and back have press on backing plates? My 64 did not.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
04-07-2019, 01:21 PM
|
#10 |
|
Registered User
Join Date: Feb 2017
Location: Munich Germany
Posts: 15
|
Re: 64 rear axle bearing
its 63 and early 64 12bolt axles with 17 spline-the later design with 30spline axles are all the same
|
|
|
|
|
04-07-2019, 11:08 PM
|
#11 | |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 64 rear axle bearing
On a 700R4 it is not a kick down cable. It is the TV cable and if it is not connected and adjusted correctly, you will burn up the trans in a short time. Have you checked with Bowtie Overdrives for the bracket? I'm not sure if anyone makes a bracket and the necessary geometry components for a I6 with a 1Bbl. If BO does not have what you need you will have to fabricate all the components yourself.
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
|
04-11-2019, 04:51 AM
|
#12 |
|
Registered User
Join Date: Oct 2016
Location: elizabethton tn
Posts: 7
|
Re: 64 rear axle bearing
Thanks cap i will check with bowtie
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
