2018 L83/4L80E Swap In Progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GreyGhost85 · 03-29-2019, 11:02 AM

Hey guys, just picked up a 2018 L83 and 6L80E drop out with 12000 miles. I have some general questions in regards to this set up and maybe someone could point me in the right direction. I know that I need to get the brackets to retrofit mechanical power steering pump etc... My initial question is:

1. The pedal assembly has the pedal and brake all together on the same bracket. There is not a connection on the harness that routes and connect to the pedal assembly plugs. Can I wire from pedal directly to harness if I can locate the connector? Can I ditch the brake pedal or is there a reason they are in combination?

2. Are there any DIY or HOW TOs? for L83 engine harness reworks to stand alone.

3. Are there supposed to be open or unused slots under the fuse block?

GreyGhost85 · 03-29-2019, 11:04 AM

Some Pics of Truck its going in:

GreyGhost85 · 03-29-2019, 11:08 AM

**made an error in post. 6l80 not 4l80

87chevy.com · 03-29-2019, 01:50 PM

PM sent

Daaaanz67 · 04-01-2019, 11:58 AM

Contact swap time he’s on u-tube for the harness.

03-29-2019, 11:02 AM	#1
GreyGhost85 Registered User Join Date: Oct 2018 Location: Dallas Texas Posts: 113	2018 L83/4L80E Swap In Progress Hey guys, just picked up a 2018 L83 and 6L80E drop out with 12000 miles. I have some general questions in regards to this set up and maybe someone could point me in the right direction. I know that I need to get the brackets to retrofit mechanical power steering pump etc... My initial question is: 1. The pedal assembly has the pedal and brake all together on the same bracket. There is not a connection on the harness that routes and connect to the pedal assembly plugs. Can I wire from pedal directly to harness if I can locate the connector? Can I ditch the brake pedal or is there a reason they are in combination? 2. Are there any DIY or HOW TOs? for L83 engine harness reworks to stand alone. 3. Are there supposed to be open or unused slots under the fuse block? Attached Images Last edited by GreyGhost85; 03-29-2019 at 11:07 AM.

03-29-2019, 11:04 AM	#2
GreyGhost85 Registered User Join Date: Oct 2018 Location: Dallas Texas Posts: 113	Re: 2018 L83/4L80E Swap In Progress Some Pics of Truck its going in: Attached Images

03-29-2019, 11:08 AM	#3
GreyGhost85 Registered User Join Date: Oct 2018 Location: Dallas Texas Posts: 113	Re: 2018 L83/4L80E Swap In Progress **made an error in post. 6l80 not 4l80

03-29-2019, 01:50 PM	#4
87chevy.com BMW & ASE Master Certified Join Date: Feb 2004 Location: Houston, Texas Posts: 1,266	Re: 2018 L83/4L80E Swap In Progress PM sent __________________ 1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress

04-01-2019, 11:58 AM	#5
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: 2018 L83/4L80E Swap In Progress Contact swap time he’s on u-tube for the harness.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.