|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-04-2019, 02:46 PM
|
#1 |
|
Registered User
Join Date: Mar 2014
Location: Ionia, MI
Posts: 199
|
5.3 level sensor a quart low or right.
I am tearing a 02 truck 5.3 down to the short block here over the next few weeks. Just replacing the seals and a couple sensors before throwing it in.
My headers are going up so that level sensor will be exposed and easily seem. Planning on just blocking it off. But was thinking about drilling/welding a straight or 99 to the blockoff plug and having a sight tube eliminating the dipstick completely. I have a clear tube from granger made for oil and 350F that I used on a sbc modifying a 4qt pan and eliminated the dipstick on that engine. I would like to do the same on this 5.3. If the oil level sensor is a quart low I could install a 90 to the correct height marking the tube if need be. If it is correct then I will go straight out then 90 up letting me see that oil is up to the right level in the clear section of tube before the 90. The 90 will have a tube going up to the catch can letting me open a ball valve and drain that contents back into the oil pan. I am guessing it is a quart low. But i want to make sure.
__________________
1991 Metro commuter 1991 s10 future project truck 1987 V10 backup daily/junk truck 1985 K20 Winter beater 1991 R30(squarebody) c/c flatbed towrig 1994 s10 80"wb custom build |
|
|
|
04-04-2019, 03:06 PM
|
#2 |
|
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: 5.3 level sensor a quart low or right.
read it wrong . carry on .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
|
|
|
|
04-04-2019, 05:26 PM
|
#3 |
|
Post Whore
  
Join Date: May 2015
Location: Alabama
Posts: 14,671
|
Re: 5.3 level sensor a quart low or right.
im not even sure how you can see it...I cant see mine...but I see you say you headers are going up......and I don't know about the tube idea...id be scared a rock would fly up and bust it...dipstick works just fine for me.. my vett pan has a nice screw in plug in there though
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
|
|
|
|
04-06-2019, 10:50 AM
|
#4 |
|
Senior Member
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,237
|
Re: 5.3 level sensor a quart low or right.
on my 5.3 suburban low oil level does not come on till its 2 qts low on oil
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
