IA parting 1997 k-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wahl4m · 05-06-2019, 10:14 AM

bought a 97 k-10-4x4 for the motor -this truck is a 114000 mile unit -frame is rusty -have a nice 4el60 tranny -$200.00 was rebuilt at some time,transfer case $175.00,all driveshafts,front & rear axle assemblies,nice grill assembly,radiator,oil coolers,bumpers-40.00 each,anyway there are some pics on craigslist dm ia -lots of small stuff

**special-K** · 05-06-2019, 08:32 PM

Can you post pictures here since you listed it here? Or at least post a link? What interior is in it?

wahl4m · 05-06-2019, 09:50 PM

seats,door panels ,carpet & headliner -all is gone -do have a nice gauge
assembly & bezel & dash top all - 85.00-oil cooler -complete & nice $90,00,nice radiator -$45.00,

shifty · 05-06-2019, 10:02 PM

Darn! My hunt for a neutral/tan leather rear folding bench continues.

95 S_Trucker · 05-07-2019, 07:51 AM

Can you post a pic of the dash bezel? How much shipped to 17603?

zaccaglin · 05-11-2019, 09:48 PM

Does your dash have the airbag key switch next to the radio? If so how much for that? Also how is the drivers door inside door handle?

wahl4m · 05-13-2019, 12:04 PM

sent you a reply ? got switdh in small panel -sorry doors are gone !-can send switch postal -make me an reasonable offer / should fit in small box -dont know what a new one is ??

95 S_Trucker · 05-13-2019, 01:17 PM

Nope. I never got a reply. Let me know. Thanks.

zaccaglin · 05-13-2019, 03:30 PM

Quote:

Originally Posted by wahl4m

sent you a reply ? got switdh in small panel -sorry doors are gone !-can send switch postal -make me an reasonable offer / should fit in small box -dont know what a new one is ??

I picked one the may work up out of an S10 yesterday at the junkyard. If it doesn’t work I’ll let you know

95 S_Trucker · 05-14-2019, 05:38 AM

Can you post a pic of the dash bezel? How much shipped to 17603?

zaccaglin · 05-14-2019, 01:28 PM

Quote:

Originally Posted by wahl4m

sent you a reply ? got switdh in small panel -sorry doors are gone !-can send switch postal -make me an reasonable offer / should fit in small box -dont know what a new one is ??

I may end up needing it. Would 5$ plus the ride work?

95 S_Trucker · 05-21-2019, 10:55 AM

Bueller, bueller....

Been asking about the dash bezel for 2 weeks now. Please respond. Even if you sold it, let us know.

wahl4m · 05-24-2019, 12:17 PM

i got a nice rebuilt trans -4 el 80 $175.00& transfer case $175.00 both work good- trans has been rebuilt -truck had about 140,000 miles owner just never drove it very much & got real rusty on frame -i bought it for the v-8,also got oil cooler-$75.00 & nice radiator$50.00-hood-$40.00,lots of small misc .wouild like to sell all mparts to somebody close to iowa -might be hard to ship! cash talks anyway !!!

44th Miss Inf · 05-26-2019, 07:45 PM

edit, please do not hijack member posts. thank you

zaccaglin · 06-04-2019, 07:50 PM

Quote:

Originally Posted by wahl4m

sent you a reply ? got switdh in small panel -sorry doors are gone !-can send switch postal -make me an reasonable offer / should fit in small box -dont know what a new one is ??

Still interested in this airbag switch.. 5$ plus the ride? Yay, nay?

wahl4m · 06-04-2019, 10:10 PM

its gone aready sold - seems as thought everybody needed one thanks anyway mike

05-06-2019, 10:14 AM	#1
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 920	parting 1997 k-10 bought a 97 k-10-4x4 for the motor -this truck is a 114000 mile unit -frame is rusty -have a nice 4el60 tranny -$200.00 was rebuilt at some time,transfer case $175.00,all driveshafts,front & rear axle assemblies,nice grill assembly,radiator,oil coolers,bumpers-40.00 each,anyway there are some pics on craigslist dm ia -lots of small stuff

05-06-2019, 08:32 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: parting 1997 k-10 Can you post pictures here since you listed it here? Or at least post a link? What interior is in it? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-06-2019, 09:50 PM	#3
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 920	Re: parting 1997 k-10 seats,door panels ,carpet & headliner -all is gone -do have a nice gauge assembly & bezel & dash top all - 85.00-oil cooler -complete & nice $90,00,nice radiator -$45.00,

05-06-2019, 10:02 PM	#4
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: parting 1997 k-10 Darn! My hunt for a neutral/tan leather rear folding bench continues. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

05-07-2019, 07:51 AM	#5
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: parting 1997 k-10 Can you post a pic of the dash bezel? How much shipped to 17603?

05-11-2019, 09:48 PM	#6
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: parting 1997 k-10 Does your dash have the airbag key switch next to the radio? If so how much for that? Also how is the drivers door inside door handle? __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

05-13-2019, 12:04 PM	#7
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 920	Re: parting 1997 k-10 sent you a reply ? got switdh in small panel -sorry doors are gone !-can send switch postal -make me an reasonable offer / should fit in small box -dont know what a new one is ??

05-13-2019, 01:17 PM	#8
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: parting 1997 k-10 Nope. I never got a reply. Let me know. Thanks.

05-14-2019, 05:38 AM	#10
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: parting 1997 k-10 Can you post a pic of the dash bezel? How much shipped to 17603?

05-21-2019, 10:55 AM	#12
95 S_Trucker Registered User Join Date: Oct 2009 Location: . Posts: 2,187	Re: parting 1997 k-10 Bueller, bueller.... Been asking about the dash bezel for 2 weeks now. Please respond. Even if you sold it, let us know.

05-24-2019, 12:17 PM	#13
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 920	Re: parting 1997 k-10 i got a nice rebuilt trans -4 el 80 $175.00& transfer case $175.00 both work good- trans has been rebuilt -truck had about 140,000 miles owner just never drove it very much & got real rusty on frame -i bought it for the v-8,also got oil cooler-$75.00 & nice radiator$50.00-hood-$40.00,lots of small misc .wouild like to sell all mparts to somebody close to iowa -might be hard to ship! cash talks anyway !!!

05-26-2019, 07:45 PM	#14
44th Miss Inf Registered User Join Date: Sep 2002 Location: Liberty, Mississippi Posts: 675	Re: parting 1997 k-10 edit, please do not hijack member posts. thank you

06-04-2019, 10:10 PM	#16
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 920	Re: parting 1997 k-10 its gone aready sold - seems as thought everybody needed one thanks anyway mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.