New Master Cylinder and Bleeder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Red66C10 · 08-01-2019, 10:33 PM

I replaced my original master cylinder with a new one and started bleeding the valve on top. My single line connects to the side and I plugged the very front hole with a fitting. My other C10 is exactly like this, however, my top bleeder screw is just spewing out fluid through the hole anytime I hit the brakes.... What am I doing wrong?

**Captainfab** · 08-01-2019, 11:10 PM

It sounds like the bleeder is not seated tightly or there is something in the seat. Pull the bleeder, inspect and clean if necessary. Then tighten again and see what happens.

08-01-2019, 10:33 PM	#1
Red66C10 Registered User Join Date: Jun 2018 Location: Port Byron IL Posts: 47	New Master Cylinder and Bleeder I replaced my original master cylinder with a new one and started bleeding the valve on top. My single line connects to the side and I plugged the very front hole with a fitting. My other C10 is exactly like this, however, my top bleeder screw is just spewing out fluid through the hole anytime I hit the brakes.... What am I doing wrong?

08-01-2019, 11:10 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: New Master Cylinder and Bleeder It sounds like the bleeder is not seated tightly or there is something in the seat. Pull the bleeder, inspect and clean if necessary. Then tighten again and see what happens. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.