55.2-59 front sheet metal assembly - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dsraven · 09-28-2019, 07:28 PM

looks like the dimension from the firewall to the middle of the hole for the rubber grommet mount is 1 3/8". bracket over all is 2 1/2" wide, from firewall and looks like 2 3/8 wide across the bracket.sorry, didn't get the dimension from the bend to the centerline of the 2 small holes. let me know if you really need that and I can dig that box out again.

DransportGarage · 09-29-2019, 02:42 AM

That does look more like 1-3/8" to me too (obviously). I'd go with that. Thanks, DS...

FAKKY · 09-29-2019, 07:40 AM

Dransport/dsraven - above and beyond - thx guys.
I used some of this for the trim - worked out real well.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

thanks for the pics/info and measurements.

my56chevytruck · 10-01-2019, 06:07 PM

Quote:

Originally Posted by FAKKY

Thanks ... any edge/seal work ? Home depot etc ?

I've already scratched the heck out of the paint in firewall by putting it up and down around 10 times. :P

you could buy a small hose (clear or otherwise) maybe 1/8" ID and split it, then slide it over the inner fender that would rub up against the firewall

dsraven · 10-01-2019, 08:53 PM

upholstery supply shops sell some nice edging as well.

09-28-2019, 07:28 PM	#26
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,335	Re: front sheet metal assembly looks like the dimension from the firewall to the middle of the hole for the rubber grommet mount is 1 3/8". bracket over all is 2 1/2" wide, from firewall and looks like 2 3/8 wide across the bracket.sorry, didn't get the dimension from the bend to the centerline of the 2 small holes. let me know if you really need that and I can dig that box out again.

09-29-2019, 02:42 AM	#27
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: front sheet metal assembly That does look more like 1-3/8" to me too (obviously). I'd go with that. Thanks, DS... __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)

09-29-2019, 07:40 AM	#28
FAKKY Registered User Join Date: Sep 2016 Location: Redington Beach Posts: 1,317	Re: front sheet metal assembly Dransport/dsraven - above and beyond - thx guys. I used some of this for the trim - worked out real well. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 thanks for the pics/info and measurements. __________________ FAKKY 57 PANEL BUILD

10-01-2019, 08:53 PM	#30
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,335	Re: front sheet metal assembly upholstery supply shops sell some nice edging as well.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.