Leaky control valve on power steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sstock · 11-07-2019, 09:19 AM

This is on my 1964 GMC with factory PS, it is a slave type system.
I have a rebuild seal kit that I'm going to try to stop the leaks. Was wondering if any others have had any luck with effecting a successful R&R of the control valve.

If not, are the corvette (C3) valves and cylinders direct replacements for our trucks? They look very similar or appear to be the same, but dont know for sure.

Steve

**60-66** · 11-07-2019, 11:10 AM

Ive never rebuilt one but yes its the same as Corvette , Impala , Nova and truck 1/2 and 3/4 ton Chevy and GMC,

**chewychevy67** · 11-07-2019, 11:46 AM

I purchased one for a Vette and it went on with no problems from lares. I have yet to drive it so I don't know its quality.

**chewychevy67** · 11-07-2019, 11:47 AM

Quote:

Originally Posted by sstock

This is on my 1964 GMC with factory PS, it is a slave type system.
I have a rebuild seal kit that I'm going to try to stop the leaks. Was wondering if any others have had any luck with effecting a successful R&R of the control valve.

If not, are the corvette (C3) valves and cylinders direct replacements for our trucks? They look very similar or appear to be the same, but dont know for sure.

Steve

Question. I have never driven a vehicle with this set up as my truck was unoperable when I bought it. Is it an ok system to drive with in today's traffic?

11-07-2019, 09:19 AM	#1
sstock Registered User Join Date: Mar 2014 Location: Tacoma Wa Posts: 146	Leaky control valve on power steering This is on my 1964 GMC with factory PS, it is a slave type system. I have a rebuild seal kit that I'm going to try to stop the leaks. Was wondering if any others have had any luck with effecting a successful R&R of the control valve. If not, are the corvette (C3) valves and cylinders direct replacements for our trucks? They look very similar or appear to be the same, but dont know for sure. Steve __________________ 1953 3100 261cu in, sm420, 3.55 torque tube, omaha orange 1964 GMC 1000 series,custom, 305E, sm420

11-07-2019, 11:10 AM	#2
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: Leaky control valve on power steering Ive never rebuilt one but yes its the same as Corvette , Impala , Nova and truck 1/2 and 3/4 ton Chevy and GMC, __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

11-07-2019, 11:46 AM	#3
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,553	Re: Leaky control valve on power steering I purchased one for a Vette and it went on with no problems from lares. I have yet to drive it so I don't know its quality.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.