MD rocker boxes & more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 12-08-2019, 05:08 PM

***DISCLAIMER*** these are home made pcs that I acquired that look close but I have no idea if they fit

I already bought the parts I need for my Blazer and happened on these. The rocker boxes are lighter gauge metal ( i am guessing no more than 18 ga) than the aftermarket ones I purchased. I do not know if they will be structural enough or not. I put the passenger side one up under my 72 and it seems to fit in place pretty good. these weight 12# each compared to the tri plus ones I have at 19# each. One other thing I noticed is the lip that bends toward the outer rocker is not a brake bend. Looks like it was hand bent. I am going to see if it will fit in my 10' brake tomorrow and see if I can clean that bend up some but I am not sure if it will fit in there or not.

The other 4 under body parts for the 1/4 seem to be close as well when I compare them to the ones I have sitting here. I do not have anything torn apart enough to see if they actually fit. No holes have been drilled in any of it.

For this reason I am going to sell them pretty reasonable with the understanding they may or may not actually work out of the box. I did not make them so I can't say with any certainty they are 100% correct. You might be getting a deal or you might be getting extra fab work. The choice is up to you.

All six pcs $175 plus shipping

.

**1rippen6** · 12-14-2019, 09:17 PM

Were you able to clean up the edge?

**richard2717** · 12-14-2019, 09:22 PM

Quote:

Originally Posted by 1rippen6

Were you able to clean up the edge?

Dwayne I actually forgot about them. Let me go try one right quick while I am still out here

**1rippen6** · 12-14-2019, 09:22 PM

Lol, ok let me know.

**richard2717** · 12-14-2019, 09:29 PM

With all the bends it just did fit in the brake without interference. I was able to bend it to a 90* just fine.

.

4554bbl · 12-15-2019, 09:22 PM

Hi, Ill take them if Dwayne passes. shipping will be to Bangor, Maine zip 04401, let me know, thanks Chris.

**1rippen6** · 12-15-2019, 09:23 PM

Quote:

Originally Posted by 4554bbl

Hi, Ill take them if Dwayne passes. shipping will be to Bangor, Maine zip 04401, let me know, thanks Chris.

Don't hold the for me.

**richard2717** · 12-15-2019, 09:47 PM

Quote:

Originally Posted by 4554bbl

Hi, Ill take them if Dwayne passes. shipping will be to Bangor, Maine zip 04401, let me know, thanks Chris.

Will get a quote for shipping tomorrow

4554bbl · 12-15-2019, 09:57 PM

Thanks, and can you please bend that other rocker box in your brake?

**richard2717** · 12-17-2019, 03:54 PM

Sold to 4554bbl payment received should ship tomorrow

12-08-2019, 05:08 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	rocker boxes & more *DISCLAIMER* these are home made pcs that I acquired that look close but I have no idea if they fit I already bought the parts I need for my Blazer and happened on these. The rocker boxes are lighter gauge metal ( i am guessing no more than 18 ga) than the aftermarket ones I purchased. I do not know if they will be structural enough or not. I put the passenger side one up under my 72 and it seems to fit in place pretty good. these weight 12# each compared to the tri plus ones I have at 19# each. One other thing I noticed is the lip that bends toward the outer rocker is not a brake bend. Looks like it was hand bent. I am going to see if it will fit in my 10' brake tomorrow and see if I can clean that bend up some but I am not sure if it will fit in there or not. The other 4 under body parts for the 1/4 seem to be close as well when I compare them to the ones I have sitting here. I do not have anything torn apart enough to see if they actually fit. No holes have been drilled in any of it. For this reason I am going to sell them pretty reasonable with the understanding they may or may not actually work out of the box. I did not make them so I can't say with any certainty they are 100% correct. You might be getting a deal or you might be getting extra fab work. The choice is up to you. All six pcs $175 plus shipping . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-14-2019, 09:17 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rocker boxes & more Were you able to clean up the edge?

12-14-2019, 09:22 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: rocker boxes & more Lol, ok let me know.

12-14-2019, 09:29 PM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: rocker boxes & more With all the bends it just did fit in the brake without interference. I was able to bend it to a 90* just fine. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-15-2019, 09:22 PM	#6
4554bbl Registered User Join Date: Oct 2016 Location: bangor maine Posts: 37	Re: rocker boxes & more Hi, Ill take them if Dwayne passes. shipping will be to Bangor, Maine zip 04401, let me know, thanks Chris.

12-15-2019, 09:57 PM	#9
4554bbl Registered User Join Date: Oct 2016 Location: bangor maine Posts: 37	Re: rocker boxes & more Thanks, and can you please bend that other rocker box in your brake?

12-17-2019, 03:54 PM	#10
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: rocker boxes & more Sold to 4554bbl payment received should ship tomorrow __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 12-17-2019 at 06:22 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.