MD Blazer front top hold downs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 12-19-2019, 07:54 PM

Been working on these for a while now. Getting hard to find originals anymore so I took the ones off of my original paint 72 and made some up. Spent the coin to buy the exact size punch for my iron worker for the slotted holes as well. 16 gauge black steel cut, bent and mig welded together. Holes punched, bead blasted smooth in the cabinet. I have been trying to get my powder coating setup going but it is still not ready yet so I went ahead and sprayed self etching primer & 3 coats of satin white urethane on 5 sets to get started. If I get the powder coating going soon I am going to try my luck doing the rest of them that way. Price is the same either way. I test fit every one of them on my Blazer so the hope is they fit everyone's without having to open the holes up any but I can't promise everyone's top sits same as mine.

Will sell each pair at $85 shipped conus
If you want new stainless screws to go with them $93 shipped Conus
If you only need screws they are $11.50 per set shipped conus

EDIT: 5.14.20 I am currently out of screws. I will be ordering more in the near future if the demand returns. I also only have 2 sets of hold downs left and not sure I will be making any more

EDIT:8.26.20 SOLD OUT
.Edit: 7.7.22 have several sets on the shelf

**Blazerowner** · 12-19-2019, 09:30 PM

I’ll take a set no screws. Let me know how to send payment. I have paypal.

**richard2717** · 12-19-2019, 09:34 PM

Quote:

Originally Posted by Blazerowner

I’ll take a set no screws. Let me know how to send payment. I have paypal.

I got excited and posted this a little earlier than I probably should have. I just got done spraying them so let me make sure everything is still good tomorrow before taking any payments. It will be after lunch before I can respond as I have to go out of town early in the morning for a job.

Thanks

**richard2717** · 12-19-2019, 09:44 PM

If the interest is there this will be an ongoing thing. I made a template and already paid for the punch. I have 20 sets made up but only painted 5 sets today the rest are still raw at the moment. I might have to go ahead and paint this whole 1st batch and worry about the powder coating on second round.

.

**1rippen6** · 12-19-2019, 10:57 PM

That's awesome!!! These should sell like hot cakes, LOL.

**GMCNUT** · 12-20-2019, 03:15 PM

Just saw this - I need the screws. Assume $9.50 is for 6 screws? post a picture so we can see how close to the original chromed screws these you have are and PM Paypal info / advise postage or total etc - thanks!

**richard2717** · 12-20-2019, 03:57 PM

Quote:

Originally Posted by GMCNUT

Just saw this - I need the screws. Assume $9.50 is for 6 screws? post a picture so we can see how close to the original chromed screws these you have are and PM Paypal info / advise postage or total etc - thanks!

Sorry for slow response. I have been out of town all morning then found out I won an item at a govt auction and had to go pick that up. Here are pics of the screws. $9.50 is for 6 screws and 6 lock washers all in stainless or $14 for 12/12. These are also the same screws used on the rear seat arm rest brackets

Thanks
Richard

.

**richard2717** · 12-20-2019, 04:00 PM

Quote:

Originally Posted by Blazerowner

I’ll take a set no screws. Let me know how to send payment. I have paypal.

PP is in my signature and I will ship out starting Monday. Want paint to cure good

**richard2717** · 12-20-2019, 04:06 PM

Quote:

Originally Posted by 1rippen6

That's awesome!!! These should sell like hot cakes, LOL.

If everyone pays that has asked for a set I am already out of the 1st 20 sets. I had no idea they were this needed. Looks like I know what I will be working on over the holidays.

**1rippen6** · 12-20-2019, 04:34 PM

Quote:

Originally Posted by richard2717

If everyone pays that has asked for a set I am already out of the 1st 20 sets. I had no idea they were this needed. Looks like I know what I will be working on over the holidays.

I get asked a couple of times a week for them, I very needed item!! Now, you need to start making the hatch catches, that's another one I get asked a couple of times a week.

**richard2717** · 12-20-2019, 05:04 PM

Quote:

Originally Posted by 1rippen6

I get asked a couple of times a week for them, I very needed item!! Now, you need to start making the hatch catches, that's another one I get asked a couple of times a week.

Been trying but my iron worker is limited and I have not found the trick to getting it rolled without totally effing it up. Have not put a whole lot of time into figuring out the catches just because of the other 103k user tabs I have open in my brain lol. The good thing is I believe the mounting holes are the same punch size. The front hold downs are time consuming but I am getting better at knocking them out.

**Blazerowner** · 12-21-2019, 01:13 AM

Well I’m down for a set for sure so let me know when ready.

**richard2717** · 12-22-2019, 08:46 PM

Quote:

Originally Posted by Blazerowner

Well I’m down for a set for sure so let me know when ready.

Got your payment and they ship in the morning
Thanks

**richard2717** · 12-24-2019, 04:21 PM

I do have some ready to be shipped with or without bolts.

They have all been powder coated at this point. I blasted all the ones I painted originally and powder coated them as well

.

**richard2717** · 02-04-2020, 07:37 AM

I still have a couple sets ready to go

**richard2717** · 02-10-2020, 02:57 PM

I only have 2 sets left for now

Last_Paladin · 02-14-2020, 09:03 AM

Will these fit a single wall top?

if so, I need the brackets and screws.

**richard2717** · 02-14-2020, 10:21 AM

Quote:

Originally Posted by Last_Paladin

Will these fit a single wall top?

if so, I need the brackets and screws.

yes brackets are same for both. My PP is in my signature below

**richard2717** · 02-15-2020, 09:03 AM

Quote:

Originally Posted by Last_Paladin

Will these fit a single wall top?

if so, I need the brackets and screws.

Got your payment and they will ship this morning.

**richard2717** · 02-15-2020, 09:04 AM

This leaves ONE set left available

Last_Paladin · 02-15-2020, 10:15 AM

Thanks
Posted via Mobile Device

**aotte1** · 02-15-2020, 03:10 PM

Need two sets of screws if you have them please.

Les

**richard2717** · 02-15-2020, 09:38 PM

Quote:

Originally Posted by aotte1

Need two sets of screws if you have them please.

Les

Les
PP is in my signature

$9.50 for 6 including shipping & PP fees
$14.00 for 12 including PP & shipping

Thanks
Richard

**DeadheadNM** · 02-15-2020, 09:40 PM

Strong work in producing these. Look great.

**richard2717** · 02-19-2020, 12:55 PM

Quote:

Originally Posted by DeadheadNM

Strong work in producing these. Look great.

Thanks Pete

I am out of powder coated ones for the moment. I just made up 5 more sets but it may be a day or two before I get a chance to powder coat them

12-19-2019, 07:54 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Blazer front top hold downs Been working on these for a while now. Getting hard to find originals anymore so I took the ones off of my original paint 72 and made some up. Spent the coin to buy the exact size punch for my iron worker for the slotted holes as well. 16 gauge black steel cut, bent and mig welded together. Holes punched, bead blasted smooth in the cabinet. I have been trying to get my powder coating setup going but it is still not ready yet so I went ahead and sprayed self etching primer & 3 coats of satin white urethane on 5 sets to get started. If I get the powder coating going soon I am going to try my luck doing the rest of them that way. Price is the same either way. I test fit every one of them on my Blazer so the hope is they fit everyone's without having to open the holes up any but I can't promise everyone's top sits same as mine. Will sell each pair at $85 shipped conus If you want new stainless screws to go with them $93 shipped Conus If you only need screws they are $11.50 per set shipped conus EDIT: 5.14.20 I am currently out of screws. I will be ordering more in the near future if the demand returns. I also only have 2 sets of hold downs left and not sure I will be making any more EDIT:8.26.20 SOLD OUT .Edit: 7.7.22 have several sets on the shelf Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 08-02-2022 at 05:24 PM.

12-19-2019, 09:30 PM	#2
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,956	Re: Blazer front top hold downs I’ll take a set no screws. Let me know how to send payment. I have paypal. __________________ Kirk 72 Blazer CST 4wd highlander

12-19-2019, 09:44 PM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Blazer front top hold downs If the interest is there this will be an ongoing thing. I made a template and already paid for the punch. I have 20 sets made up but only painted 5 sets today the rest are still raw at the moment. I might have to go ahead and paint this whole 1st batch and worry about the powder coating on second round. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 12-22-2019 at 02:47 PM.

12-19-2019, 10:57 PM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Blazer front top hold downs That's awesome!!! These should sell like hot cakes, LOL.

12-20-2019, 03:15 PM	#6
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: Blazer front top hold downs Just saw this - I need the screws. Assume $9.50 is for 6 screws? post a picture so we can see how close to the original chromed screws these you have are and PM Paypal info / advise postage or total etc - thanks! __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

12-21-2019, 01:13 AM	#12
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,956	Re: Blazer front top hold downs Well I’m down for a set for sure so let me know when ready. __________________ Kirk 72 Blazer CST 4wd highlander

12-24-2019, 04:21 PM	#14
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Blazer front top hold downs I do have some ready to be shipped with or without bolts. They have all been powder coated at this point. I blasted all the ones I painted originally and powder coated them as well . __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-04-2020, 07:37 AM	#15
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Blazer front top hold downs I still have a couple sets ready to go __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-10-2020, 02:57 PM	#16
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Blazer front top hold downs I only have 2 sets left for now __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-14-2020, 09:03 AM	#17
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: Blazer front top hold downs Will these fit a single wall top? if so, I need the brackets and screws.

02-15-2020, 09:04 AM	#20
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: Blazer front top hold downs This leaves ONE set left available __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-15-2020, 10:15 AM	#21
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: Blazer front top hold downs Thanks Posted via Mobile Device

02-15-2020, 03:10 PM	#22
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: Blazer front top hold downs Need two sets of screws if you have them please. Les

02-15-2020, 09:40 PM	#24
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,447	Re: Blazer front top hold downs Strong work in producing these. Look great. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.