Ptjsk '72 Jimmy Build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**29od1** · 04-22-2020, 03:54 PM

Quote:

Originally Posted by DeadheadNM

If I’m not mistaken Precision is not offering a push-on style weatherstrip for the doors. I’ll see if I can locate a relevant post. This might be a good option. Are you planning to replace the vent window rubber as well?

Edit: here’s the thread link http://67-72chevytrucks.com/vboard/s...d.php?t=753560

They’re awesome. Just put a pair on my Blazer.

Ptjsk · 05-02-2020, 12:29 AM

Doors painted. Tail gate painted.

Now to remove the windshield and paint the remaining "tub" of the truck.

Pat

jimbosprint · 05-02-2020, 10:55 AM

Nice progress!

**Ol Blue K20** · 05-02-2020, 11:17 AM

It's definitely looking good. I can't wait to see it done

Ptjsk · 05-06-2020, 11:50 PM

Top off preparing for paint!

The windshield frame looks fantastic, as well as the rear of the Jimmy. This includes the back of the tub and inside both fender-wells behind the rear wheel.

Pat

**DeadheadNM** · 05-07-2020, 07:54 AM

Good luck w the spray. Do your bed rails also have holes to accommodate a double wall top?

**Ol Blue K20** · 05-07-2020, 08:33 AM

windshield frame is in great shape. This is going to look awesome

Ptjsk · 05-07-2020, 08:59 AM

Quote:

Originally Posted by DeadheadNM

Good luck w the spray. Do your bed rails also have holes to accommodate a double wall top?

Not really sure where these would be, but the only holes on top are the ones that hold the current single wall top down.

Quote:

Originally Posted by Ol Blue K20

windshield frame is in great shape. This is going to look awesome

Thanks Bud! I'm hoping to have it painted by the end of next week.

Pat

**DeadheadNM** · 05-07-2020, 10:37 AM

The holes would be atop the bedrails near those for the 1x wall top - like a duplicate row of holes but without the associated captured washers. It seems like later 72 Flint K5s had bedsides with only provisions for 1x wall tops unlike earlier and St Louis examples.

Ptjsk · 05-07-2020, 10:38 PM

Quote:

Originally Posted by DeadheadNM

The holes would be atop the bedrails near those for the 1x wall top - like a duplicate row of holes but without the associated captured washers. It seems like later 72 Flint K5s had bedsides with only provisions for 1x wall tops unlike earlier and St Louis examples.

Here's a few pics Pete!

**DeadheadNM** · 05-08-2020, 07:18 AM

Thanks! That’s great. No holes for a double wall top. Helps to fill in a small puzzle piece.

Ptjsk · 05-08-2020, 11:02 PM

Top of windshield frame shows it's in great shape.

Bottom is equally clean too!

Pat

Ptjsk · 05-14-2020, 10:33 PM

Windshield ready, door jambs ready, rear portion of bed ready, and right side panel of bed ready for primer!

I should finish the left side tomorrow.

Damn.....this paint and body is a lot of work!

Pat

Ptjsk · 05-16-2020, 10:49 PM

First coats of primer a few days ago.

A good solid day of blocking, and then two additional coats of primer.

We'll see how the next blocking comes out, but hopefully it will be the final block.

Pat

**Ol Blue K20** · 05-17-2020, 06:16 AM

Looks good, I hope the blocking works out.

Ptjsk · 05-21-2020, 07:30 PM

AAAAHHHHH!!!!! Finally finished with paint!

**DeadheadNM** · 05-21-2020, 07:31 PM

Nice! Congrats.

jimbosprint · 05-22-2020, 12:50 AM

Excellent!

**Ol Blue K20** · 05-22-2020, 08:24 AM

Looks good, I want to see it back together.....

Ptjsk · 05-22-2020, 04:58 PM

Quote:

Originally Posted by Ol Blue K20

Looks good, I want to see it back together.....

I'm with you! Hopefully it will go together easily!

Pat

**Ol Blue K20** · 05-22-2020, 08:22 PM

Quote:

Originally Posted by Ptjsk

I'm with you! Hopefully it will go together easily!

Pat

I'm with ya on that. But, you make it look easy though.

Ptjsk · 05-23-2020, 07:38 PM

Quote:

Originally Posted by Ol Blue K20

I'm with ya on that. But, you make it look easy though.

Thanks Dale! I just have too many projects!! LOL!

Pat

Ptjsk · 05-26-2020, 09:20 AM

Cut and rubbed the paint. Turning out extremely well.

Replaced the simulated wood in the tailgate too.

Pat

jimbosprint · 05-26-2020, 11:46 AM

That looks great!

SeventyOne · 05-26-2020, 06:16 PM

Quote:

Originally Posted by Ptjsk

Cut and rubbed the paint. Turning out extremely well.

Incredible. love it!

05-02-2020, 12:29 AM	#102
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: Ptjsk '72 Jimmy Build Doors painted. Tail gate painted. Now to remove the windshield and paint the remaining "tub" of the truck. Pat Attached Images

05-02-2020, 10:55 AM	#103
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: Ptjsk '72 Jimmy Build Nice progress! __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

05-02-2020, 11:17 AM	#104
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Ptjsk '72 Jimmy Build It's definitely looking good. I can't wait to see it done __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-06-2020, 11:50 PM	#105
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: Ptjsk '72 Jimmy Build Top off preparing for paint! The windshield frame looks fantastic, as well as the rear of the Jimmy. This includes the back of the tub and inside both fender-wells behind the rear wheel. Pat Attached Images

05-07-2020, 07:54 AM	#106
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Ptjsk '72 Jimmy Build Good luck w the spray. Do your bed rails also have holes to accommodate a double wall top? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-07-2020, 08:33 AM	#107
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Ptjsk '72 Jimmy Build windshield frame is in great shape. This is going to look awesome __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-07-2020, 10:37 AM	#109
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Ptjsk '72 Jimmy Build The holes would be atop the bedrails near those for the 1x wall top - like a duplicate row of holes but without the associated captured washers. It seems like later 72 Flint K5s had bedsides with only provisions for 1x wall tops unlike earlier and St Louis examples. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-08-2020, 07:18 AM	#111
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Ptjsk '72 Jimmy Build Thanks! That’s great. No holes for a double wall top. Helps to fill in a small puzzle piece. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-08-2020, 11:02 PM	#112
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: Ptjsk '72 Jimmy Build Top of windshield frame shows it's in great shape. Bottom is equally clean too! Pat Attached Images

05-14-2020, 10:33 PM	#113
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: Ptjsk '72 Jimmy Build Windshield ready, door jambs ready, rear portion of bed ready, and right side panel of bed ready for primer! I should finish the left side tomorrow. Damn.....this paint and body is a lot of work! Pat Attached Images

05-16-2020, 10:49 PM	#114
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: Ptjsk '72 Jimmy Build First coats of primer a few days ago. A good solid day of blocking, and then two additional coats of primer. We'll see how the next blocking comes out, but hopefully it will be the final block. Pat Attached Images

05-17-2020, 06:16 AM	#115
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Ptjsk '72 Jimmy Build Looks good, I hope the blocking works out. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-21-2020, 07:30 PM	#116
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: Ptjsk '72 Jimmy Build AAAAHHHHH!!!!! Finally finished with paint! Attached Images

05-21-2020, 07:31 PM	#117
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Ptjsk '72 Jimmy Build Nice! Congrats. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

05-22-2020, 12:50 AM	#118
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: Ptjsk '72 Jimmy Build Excellent! __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)



Register or Log In To remove these advertisements.

05-22-2020, 08:24 AM	#119
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Ptjsk '72 Jimmy Build Looks good, I want to see it back together..... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-26-2020, 09:20 AM	#123
Ptjsk Registered User Join Date: Jan 2018 Location: Northern CA Posts: 588	Re: Ptjsk '72 Jimmy Build Cut and rubbed the paint. Turning out extremely well. Replaced the simulated wood in the tailgate too. Pat Attached Images

05-26-2020, 11:46 AM	#124
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 951	Re: Ptjsk '72 Jimmy Build That looks great! __________________ '72 Chevrolet K10 Cheyenne '72 Chevrolet C20 Deluxe (sold)

Register or Log In To remove these advertisements.