Gauge Cluster Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**NGN** · 05-07-2020, 12:07 AM

I'm changing over from a three cluster gauge to a seven cluster gauge and my question is, is the wire harness going to be the same, hopefully a matching fit, I hope I hope.
Thanks for any help
NGN
Nick

**jocko** · 05-07-2020, 12:18 AM

look about halfway down here here

**FirstOwner69** · 05-07-2020, 12:29 AM

The connector itself is the same but the wires are in different locations. Therefore, you will need to re-pin it.

Here is more discussion.
http://67-72chevytrucks.com/vboard/s...d.php?t=295681

franken · 05-07-2020, 02:57 AM

There are other things that are different as well. For example the temp sensor for a light and gauge are different, etc.

**TBONE1964** · 05-07-2020, 09:08 AM

https://gmcpauls.com/Pix/idiotlightconnectordiagram.jpg

https://gmcpauls.com/Pix/gaugeconnectordiagram.jpg

The term used “idiot light “ has been around since time began. I prefer the proper name “warning light “.

I have a thread that explains how to re pin the connector and the tool needed .

Any questions in this contact me.

Tom

**TBONE1964** · 05-07-2020, 09:13 AM

Quote:

Originally Posted by jocko

look about halfway down here here

Best source of info on line for this 👍

Richard2112 · 05-07-2020, 09:34 AM

Subscribing for the reference material. Good info.

05-07-2020, 12:07 AM	#1
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 838	Gauge Cluster Question I'm changing over from a three cluster gauge to a seven cluster gauge and my question is, is the wire harness going to be the same, hopefully a matching fit, I hope I hope. Thanks for any help NGN Nick

05-07-2020, 12:18 AM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,985	Re: Gauge Cluster Question look about halfway down here here

05-07-2020, 12:29 AM	#3
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,853	Re: Gauge Cluster Question The connector itself is the same but the wires are in different locations. Therefore, you will need to re-pin it. Here is more discussion. http://67-72chevytrucks.com/vboard/s...d.php?t=295681 __________________ Jim

05-07-2020, 02:57 AM	#4
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,130	Re: Gauge Cluster Question There are other things that are different as well. For example the temp sensor for a light and gauge are different, etc.

05-07-2020, 09:08 AM	#5
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Gauge Cluster Question https://gmcpauls.com/Pix/idiotlightconnectordiagram.jpg https://gmcpauls.com/Pix/gaugeconnectordiagram.jpg The term used “idiot light “ has been around since time began. I prefer the proper name “warning light “. I have a thread that explains how to re pin the connector and the tool needed . Any questions in this contact me. Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

05-07-2020, 09:34 AM	#7
Richard2112 Registered User Join Date: Jul 2014 Location: South East Ohio Posts: 644	Re: Gauge Cluster Question Subscribing for the reference material. Good info.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.