Removing V.A's sure fit kit louvers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AcampoDave · 11-04-2020, 08:37 PM

Any hope of removing them from the manifold without breaking them? I want to paint the manifold in satin black because the high gloss lusture just doesn't do it for me. Problem is the lovers must come out to reveal the screws that attach the manold to the dash.

64shortbox · 11-05-2020, 05:15 PM

I'm guessing they just snap in to the housing. Unfortunately I tossed my VA center vent years ago when I found ones from a 60's Chrysler i liked a lot better.

AcampoDave · 11-05-2020, 07:46 PM

I figured I wrap this up.....Vintage Air called me back today. There are tabs located dead center at the top and bottom of the housing. He said to squeeze just enough to get a small screwdriver in the gap and release them. Now we know.

AcampoDave · 11-06-2020, 08:34 PM

So, in case anyone ever tries this, the advice from Vintage was incorrect. There are release tabs at the top and bottom but they are NOT dead center. They are at the ends and there are four of them. I got them to depress by working a thin putty knife blade between the louver frames and the manifold....nothing broke.

11-04-2020, 08:37 PM	#1
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,778	Removing V.A's sure fit kit louvers Any hope of removing them from the manifold without breaking them? I want to paint the manifold in satin black because the high gloss lusture just doesn't do it for me. Problem is the lovers must come out to reveal the screws that attach the manold to the dash. Attached Images

11-05-2020, 05:15 PM	#2
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 734	Re: Removing V.A's sure fit kit louvers I'm guessing they just snap in to the housing. Unfortunately I tossed my VA center vent years ago when I found ones from a 60's Chrysler i liked a lot better.

11-05-2020, 07:46 PM	#3
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,778	Re: Removing V.A's sure fit kit louvers I figured I wrap this up.....Vintage Air called me back today. There are tabs located dead center at the top and bottom of the housing. He said to squeeze just enough to get a small screwdriver in the gap and release them. Now we know.

11-06-2020, 08:34 PM	#4
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,778	Re: Removing V.A's sure fit kit louvers So, in case anyone ever tries this, the advice from Vintage was incorrect. There are release tabs at the top and bottom but they are NOT dead center. They are at the ends and there are four of them. I got them to depress by working a thin putty knife blade between the louver frames and the manifold....nothing broke. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.