The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-13-2020, 07:33 AM   #1
1979 GMC Sierra
Registered User
 
1979 GMC Sierra's Avatar
 
Join Date: Nov 2010
Location: Niagara, Ontario
Posts: 268
700r4 vacuum hose and 2 wires for lock-up?

Hey guys, i just got my 700r4 tranny fixed (we took it out of the truck and brought it to a shop). It's an early model (82-84) that i had in my 76. So when installing it back into my 76, there's a vacuum hose and 2 wires for lock-up...not sure where they go correctly? Any info would be appreciated. Thanks.
__________________
1979 GMC Sierra 3/4 ton Camper Special
1976 Chevy Cheyenne 3/4 ton
1979 GMC Sierra is offline   Reply With Quote
Old 12-13-2020, 07:41 AM   #2
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,697
Re: 700r4 vacuum hose and 2 wires for lock-up?

I believe only the t400 had vacuum? 700R4 should have a TV cable.
Corts60 is offline   Reply With Quote
Old 12-19-2020, 02:22 PM   #3
Mixup
Registered User
 
Join Date: Jan 2002
Location: Henderson, NV
Posts: 358
Re: 700r4 vacuum hose and 2 wires for lock-up?

No vacuum hose on any of my 700r4's There is a kit for the lockup.
__________________
1980 Chevy Shortbed Pickup

1969 Z28 engine

Turbo 350
Mixup is offline   Reply With Quote
Old 12-19-2020, 05:21 PM   #4
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,635
Re: 700r4 vacuum hose and 2 wires for lock-up?

Are you sure you don't have a T350C
kwmech is offline   Reply With Quote
Old 12-20-2020, 03:13 PM   #5
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,977
Re: 700r4 vacuum hose and 2 wires for lock-up?

TH700R4 & 4L60 have TV cables not vacuum modulators.
If you have a hose on a TH700R4 transmission it's a vent.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.
hatzie is offline   Reply With Quote
Old 12-22-2020, 01:06 PM   #6
Desert1957
Registered User
 
Desert1957's Avatar
 
Join Date: Apr 2009
Location: New Freedom Pa.
Posts: 1,335
Re: 700r4 vacuum hose and 2 wires for lock-up?

This is the only thing I've ever seen controlling anything on a 700R4 , It has a single vacuum line and a two wire harness that controls torque convertor lockup (TCC).

Name:  epu6yse8.jpg
Views: 3857
Size:  43.5 KB
__________________
Desert
Desert1957 is offline   Reply With Quote
Old 12-22-2020, 06:13 PM   #7
Joe_63
Registered User
 
Join Date: Jan 2013
Location: Ontario, Canada
Posts: 9
Re: 700r4 vacuum hose and 2 wires for lock-up?

All 700R4's do have one electrical plug located on the left side of the trans that I know of which is for converter lockup. While the trans doesn't have a vacuum modulator like the 350's and 400's it does have a vacuum switch to unlock the converter under load which is located by the brake booster and looks similar to the one pictured by desert. The one he showed though is actually a vacuum tip-in switch for the later ESC distributors. I attached a wiring diagram from a factory manual (Note RPO MD8 is for a 700R4) I believe there is a non-egr one that exists too but is very similar. Hope that helps!
Attached Images
  
Joe_63 is offline   Reply With Quote
Old 12-22-2020, 06:23 PM   #8
Joe_63
Registered User
 
Join Date: Jan 2013
Location: Ontario, Canada
Posts: 9
Re: 700r4 vacuum hose and 2 wires for lock-up?

Found a picture online, this is the vacuum switch and plug for the TCC
Attached Images
 
Joe_63 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:07 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com