|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-06-2021, 10:25 PM
|
#1 |
|
Registered User
Join Date: Jul 2013
Location: Ocala, FL
Posts: 11
|
PCM / TCM / Fuse box mounting
Doing a LS376/480 with a 4L65e in a 66 C10. I am doing a nice street/show build and looking for the best place to mount the PCM, TCM (trans control), and the big ugly fusebox that is a part of the GM Performance harness that is hidden but also reasonably easy to reach, especially with the fusebox.
|
|
|
|
02-07-2021, 06:03 PM
|
#2 |
|
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,132
|
Re: PCM / TCM / Fuse box mounting
I put the ECM behind the glove box. Fuses, relays, CEL screwed onto the heater box.
|
|
|
|
|
02-07-2021, 06:49 PM
|
#3 |
|
Registered User
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 995
|
Re: PCM / TCM / Fuse box mounting
Another option is on the hump under the console. Of course the length of your harness could be a limiting factor.
|
|
|
|
|
02-07-2021, 10:03 PM
|
#4 |
|
Registered User
Join Date: Jul 2013
Location: Ocala, FL
Posts: 11
|
Re: PCM / TCM / Fuse box mounting
hump may be a good idea. Don't think we will have room behind the glovebox because of the vintage air. Hope to have the body back from paint this month, so we will see. Still open to other ideas and pics of how others made it work.
|
|
|
|
|
02-08-2021, 01:48 PM
|
#5 |
|
Registered User
Join Date: Jan 2013
Location: Imperial, MO
Posts: 1,003
|
Re: PCM / TCM / Fuse box mounting
Under the seat.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
