Newer style door check? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigmoe · 03-24-2021, 12:36 PM

I put the Jeep style door checks in my truck during reassembly. I split the rubber in half so it would open more. Works okay but the door could open a bit more and it doesn't have any detents. I've been noticing a newer version of this style of door check is used in many newer vehicles. I was in a friends Carolla last week and saw there's had a couple of detents. Newer Fords have similar too. Unfortunately my local wrecker no longer allows customers to pick and pull anymore so that will stop me from shopping around for measurements. I might buy a new Carolla one on line just to check it out. They are pretty cheap to buy. If anyone here is planning a trip to a pick and pull you should take some measurements. Picture is 09-13 Carolla.

**The Rocknrod** · 03-24-2021, 12:52 PM

Isnt the eye on the A-Pillar 90 degrees out on that pic?

**cwcarpenter98** · 03-24-2021, 12:57 PM

If the pivot at the pillar gets removed, that might end up working.
It would be nice if the mounting studs on the door lined up

**The Rocknrod** · 03-24-2021, 01:01 PM

Quote:

Originally Posted by cwcarpenter98

If the pivot at the pillar gets removed, that might end up working.
It would be nice if the mounting studs on the door lined up

Oh ya I see that now.

**jayoldschool** · 03-24-2021, 01:53 PM

Pretty sure Dorman makes these aftermarket. A good source for inexpensive experimentation.

**The Rocknrod** · 03-24-2021, 02:56 PM

Ya. Somebody experiment.

03-24-2021, 12:36 PM	#1
bigmoe Registered User Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 995	Newer style door check? I put the Jeep style door checks in my truck during reassembly. I split the rubber in half so it would open more. Works okay but the door could open a bit more and it doesn't have any detents. I've been noticing a newer version of this style of door check is used in many newer vehicles. I was in a friends Carolla last week and saw there's had a couple of detents. Newer Fords have similar too. Unfortunately my local wrecker no longer allows customers to pick and pull anymore so that will stop me from shopping around for measurements. I might buy a new Carolla one on line just to check it out. They are pretty cheap to buy. If anyone here is planning a trip to a pick and pull you should take some measurements. Picture is 09-13 Carolla. Attached Images

03-24-2021, 12:52 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Newer style door check? Isnt the eye on the A-Pillar 90 degrees out on that pic? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-24-2021, 12:57 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,491	Re: Newer style door check? If the pivot at the pillar gets removed, that might end up working. It would be nice if the mounting studs on the door lined up __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-24-2021, 01:53 PM	#5
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,176	Re: Newer style door check? Pretty sure Dorman makes these aftermarket. A good source for inexpensive experimentation.

03-24-2021, 02:56 PM	#6
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Newer style door check? Ya. Somebody experiment. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.