Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 09-12-2021, 12:00 PM

Is a 62 c60 cab and doors the same as a 62 c10 cab and doors?
Thanks for any help. Bill

**cwcarpenter98** · 09-12-2021, 03:11 PM

The doors and most of the cab are the same. There's some differences in the floor and transmission tunnel area between the two.

On the cab and doors that were used on the truck with the shorter nose, the bottom, front pillars are different and the bottom, front corner of the door is cut to accommodate the front end being shorter. I don't remember if some of the C60s had the short nose, or if that was for the even heavier duty trucks

billsbowtie · 09-12-2021, 03:41 PM

The cab and doors I was looking at looks like the truck you have in picture below with wrap around windshield and doors are square at bottom. Thanks bill

09-12-2021, 12:00 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Question Is a 62 c60 cab and doors the same as a 62 c10 cab and doors? Thanks for any help. Bill __________________ i have 67/72 chevy truck parts f/s.

09-12-2021, 03:11 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Question The doors and most of the cab are the same. There's some differences in the floor and transmission tunnel area between the two. On the cab and doors that were used on the truck with the shorter nose, the bottom, front pillars are different and the bottom, front corner of the door is cut to accommodate the front end being shorter. I don't remember if some of the C60s had the short nose, or if that was for the even heavier duty trucks __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

09-12-2021, 03:41 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Question The cab and doors I was looking at looks like the truck you have in picture below with wrap around windshield and doors are square at bottom. Thanks bill __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.