The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-13-2021, 05:00 PM   #1
lutronjim
Registered User
 
Join Date: Dec 2013
Location: Dunwoody,Ga
Posts: 443
Classic Instruments Temperature Sensor 12mm

Anybody have any info on this sensor?
https://shop.classicinstruments.com/sn12mm

Thanks
lutronjim is offline   Reply With Quote
Old 09-13-2021, 05:14 PM   #2
kglowacky
Registered User
 
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 588
Re: Classic Instruments Temperature Sensor 12mm

Yes. I am currently running one on my 2001 LS1. Its a direct fit and screws right in the rear of the pass side head. I am running it to factory gauges of my 78 C10 Silverado. Not sure if it is exact in temp readings but it will run at 1/2 gauge and at 3/4 gauge which is 207 (based on my PCM setup). The fans turn on and it cools down to 1/2 and the fans shut off. So for me it works fine as a indicator of I am in a safe running temp.
kglowacky is offline   Reply With Quote
Old 09-13-2021, 09:12 PM   #3
lutronjim
Registered User
 
Join Date: Dec 2013
Location: Dunwoody,Ga
Posts: 443
Re: Classic Instruments Temperature Sensor 12mm

Do you happen to know if the 78 temp gauge has the same ohms range as 70?
lutronjim is offline   Reply With Quote
Old 09-13-2021, 09:35 PM   #4
kglowacky
Registered User
 
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 588
Re: Classic Instruments Temperature Sensor 12mm

I don't know. All I can tell you is the 3/4 position is around 207 temp. based on how my computer is set to turn on the fans
kglowacky is offline   Reply With Quote
Old 09-15-2021, 11:47 AM   #5
A1971Blazer
Senior Member
 
A1971Blazer's Avatar
 
Join Date: Nov 2013
Location: East Tennessee
Posts: 2,199
Re: Classic Instruments Temperature Sensor 12mm

I think the Classic Instruments sender is calibrated for their gauge...not sure of the resistance range?
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............
A1971Blazer is offline   Reply With Quote
Old 01-15-2023, 12:41 PM   #6
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,124
Re: Classic Instruments Temperature Sensor 12mm

This is the exact issues I'm running into as well

I have NVU gauges and I am looking for a temp gauge sensor that is M12 x 1.5 - while this gauge fits that spec will it read accurately with my NVU gauges ?

My other option is to use the M12 adaptor from ITC ( or others) but then the temp probe tip isn't truly in the water flow so how accurate will that be?

I cant be the only one trying to solve this ....
__________________
1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio .....

1971 CREWMAX Build.....at body shop for couple more years
6600DURAMAX is offline   Reply With Quote
Old 01-16-2023, 11:16 AM   #7
kglowacky
Registered User
 
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 588
Re: Classic Instruments Temperature Sensor 12mm

i am running one in my 78 with factory gauge and ecm from a 2002 camero. Works great . fans come on at 1/2 go off at 1/4 gauge . Dont know anymore details then that.

Last edited by kglowacky; 01-17-2023 at 03:26 AM.
kglowacky is offline   Reply With Quote
Old 01-16-2023, 05:46 PM   #8
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,124
Re: Classic Instruments Temperature Sensor 12mm

I called classic industries and they are not willing to give out the OHMs range for their sending unit ........... I find that very odd. How do they expect people to buy their part if they wont share the details of them ......

maybe its just me
__________________
1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio .....

1971 CREWMAX Build.....at body shop for couple more years
6600DURAMAX is offline   Reply With Quote
Old 01-17-2023, 08:31 AM   #9
Joyridin
Registered User
 
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 557
Re: Classic Instruments Temperature Sensor 12mm

I used one from Stewart Warner. Seemed to work fine. It took me 3-4 months to get it at the time, but that was during covid.
Joyridin is offline   Reply With Quote
Old 01-18-2023, 01:56 PM   #10
6600DURAMAX
Registered User
 
6600DURAMAX's Avatar
 
Join Date: Nov 2000
Location: Wheatfield IN, USA
Posts: 1,124
Re: Classic Instruments Temperature Sensor 12mm

I just ordered the adapter and will see what happens
__________________
1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio .....

1971 CREWMAX Build.....at body shop for couple more years
6600DURAMAX is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com