MA WTB Fuel fill screws - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Thealien** · 11-22-2021, 07:07 PM

I need the 4 clips/jnuts and screws that fasten the fuel fill to the inner bedside. Mine doesn't happen to have any. Getting ready to swap out the fuel fill and would like to use OEM fasteners to attach it.

Thanks
Mark

**Thealien** · 11-25-2021, 06:49 AM

Clips/screws?

**Getter-Done** · 11-25-2021, 09:09 AM

This company was brought up awhile back.

Link: https://www.amkproducts.com/

I have been searching since I seen your post,
And finally found it.
You could maybe give them a call?
If they don't have them maybe they know who does?

**Thealien** · 11-25-2021, 09:53 AM

Part of my issue is I have none to compare them to. If I could take a picture and send it to them or even McMaster Carr etc. I could probably match them up. But since I have none I’m hoping somebody that’s disassemble the vehicle might have a set that they would sell me. If I continue to come up empty-handed I will hopefully ask someone for a picture of a screw and nut so that I can get something close or matching?

Thank you for the link and trying to help. And I hope you have a great Thanksgiving.

**Getter-Done** · 11-25-2021, 10:04 AM

Your welcome.
And Happy Thanksgiving to you.

Is this for a Blazer? Truck?

If Blazer, here is 2 pics I stole

from classic bowties

Name: blazer.jpg
Views: 192
Size: 98.1 KB

Name: blazer1.jpg
Views: 259
Size: 99.7 KB

**Thealien** · 11-25-2021, 10:05 AM

Yes that is it and you can see the screws that hold it to the inner bedside. I need pictures and or the actual screws that screw through those four holes in the J nuts or clips that hold them?

**Getter-Done** · 11-25-2021, 10:07 AM

maybe Classic Bowties or someone will chime in.

**Thealien** · 11-30-2021, 05:25 PM

Looking for some fuel fill screws and clips.

**richard2717** · 12-01-2021, 08:33 AM

Here are the correct 4 clips. There were no screws left in them when I pulled them off the panel just now so I went thru some of my stash and came up with these screws. Based off of the neck I have here the head is just a little smaller than the originals

**Thealien** · 12-01-2021, 10:46 AM

Are you posting those just so I have pictures to help find some or are those for sale?

**Thealien** · 12-06-2021, 02:51 PM

received thanks

**richard2717** · 12-06-2021, 05:05 PM

Quote:

Originally Posted by Thealien

received thanks

Glad they made it

11-22-2021, 07:07 PM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	WTB Fuel fill screws I need the 4 clips/jnuts and screws that fasten the fuel fill to the inner bedside. Mine doesn't happen to have any. Getting ready to swap out the fuel fill and would like to use OEM fasteners to attach it. Thanks Mark __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

11-25-2021, 06:49 AM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: WTB Fuel fill screws Clips/screws? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

11-25-2021, 09:09 AM	#3
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,417	Re: WTB Fuel fill screws This company was brought up awhile back. Link: https://www.amkproducts.com/ I have been searching since I seen your post, And finally found it. You could maybe give them a call? If they don't have them maybe they know who does? __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

11-25-2021, 09:53 AM	#4
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: WTB Fuel fill screws Part of my issue is I have none to compare them to. If I could take a picture and send it to them or even McMaster Carr etc. I could probably match them up. But since I have none I’m hoping somebody that’s disassemble the vehicle might have a set that they would sell me. If I continue to come up empty-handed I will hopefully ask someone for a picture of a screw and nut so that I can get something close or matching? Thank you for the link and trying to help. And I hope you have a great Thanksgiving. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

11-25-2021, 10:04 AM	#5
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,417	Re: WTB Fuel fill screws Your welcome. And Happy Thanksgiving to you. Is this for a Blazer? Truck? If Blazer, here is 2 pics I stole from classic bowties __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

11-25-2021, 10:05 AM	#6
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: WTB Fuel fill screws Yes that is it and you can see the screws that hold it to the inner bedside. I need pictures and or the actual screws that screw through those four holes in the J nuts or clips that hold them? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

11-25-2021, 10:07 AM	#7
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,417	Re: WTB Fuel fill screws maybe Classic Bowties or someone will chime in. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

11-30-2021, 05:25 PM	#8
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: WTB Fuel fill screws Looking for some fuel fill screws and clips. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

12-01-2021, 08:33 AM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: WTB Fuel fill screws Here are the correct 4 clips. There were no screws left in them when I pulled them off the panel just now so I went thru some of my stash and came up with these screws. Based off of the neck I have here the head is just a little smaller than the originals Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-01-2021, 10:46 AM	#10
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: WTB Fuel fill screws Are you posting those just so I have pictures to help find some or are those for sale? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

12-06-2021, 02:51 PM	#11
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: WTB Fuel fill screws received thanks __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.