Power Steering Pump Fitting

[DKSpringer]

Hi all-

I"m chasing a power steering leak on my truck. It was converted to a serpentine setup when rebuilt, and the high pressure fitting in the back of the power steering pump was re-used. Worked fine for a few years, but now I have a slow drip.

I removed that fitting, and planned to just replace the o-ring. It looks like it's about a 9/16 ID and 13/16 OD, accounting for some squish. Anyone know for sure or have a part number?

Also, I saw a few scratches on the flare inside that fitting. Anyone know where to get a replacement? I've found quite a few online that are made for reducing the flow https://www.ebay.com/itm/383847450967, but haven't been able to locate just a stock replacement.

Picture attached for the piece I'm looking for. I have 77 lines, so need the flared end on the outlet, not the newer O-ring style.

[Rickysnickers]

Here, this one? https://www.rockauto.com/en/parts/ac...nd+fitting,415

I Googled "saginaw power steering outlet fitting."

[DKSpringer]

Close! That one is for the later models with o-ring fittings on the lines instead of flare fittings. The outside of that one is correct, but it won't mate with the existing lines.

[temp190]

This?
https://www.rockauto.com/en/moreinfo...qCxHd3XA%3D%3D

[DKSpringer]

I award you all of the internet points. Don't know how I missed that one. Thought I had searched for every possible name for that thing. Thanks!!