Removing trim question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

custom10nut · 09-16-2022, 06:54 PM

Before I created this, I did a search for how to remove the Cab and Lower moulding, without breaking anything, but couldn’t find anything pertinent

As far as the cab moulding goes:
Do the little plastic clips slide sideways to unlock from the stud?
On the Lower Body Moulding:
Is there a way to unlatch the mounting clips without destroying them?
Thanks in advance

**Getter-Done** · 09-16-2022, 09:25 PM

Here is a video that I saw the other day .

How To Remove C10 Molding QUICK AND EASY - YouTube

custom10nut · 09-17-2022, 07:27 AM

This video is just what I was looking for, thanks

**Grumpy old man** · 09-17-2022, 08:14 AM

On the cab paint divider trim ,You can use a plastic trim tool to pop the 2 clips on the outside end behind the door and then carefully slide the trim out , When installing that same trim you set the top edge of the trim on the new clips and with a glancing blow with the palm of your hand snapping the trim into place , You can't slide the trim back in place without taking the chance of scratching the paint . , if your saving the trim to reuse after paint consider polishing it while it's still in place .

https://www.amazon.com/Tresalto-Auto...-1-spons&psc=1

https://67-72chevytrucks.com/vboard/...d.php?t=765868

custom10nut · 09-17-2022, 09:10 PM

Dually noted and thanks for the knowledge

09-16-2022, 06:54 PM	#1
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,903	Removing trim question Before I created this, I did a search for how to remove the Cab and Lower moulding, without breaking anything, but couldn’t find anything pertinent As far as the cab moulding goes: Do the little plastic clips slide sideways to unlock from the stud? On the Lower Body Moulding: Is there a way to unlatch the mounting clips without destroying them? Thanks in advance

09-17-2022, 07:27 AM	#3
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,903	Re: Removing trim question This video is just what I was looking for, thanks

09-17-2022, 08:14 AM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Removing trim question On the cab paint divider trim ,You can use a plastic trim tool to pop the 2 clips on the outside end behind the door and then carefully slide the trim out , When installing that same trim you set the top edge of the trim on the new clips and with a glancing blow with the palm of your hand snapping the trim into place , You can't slide the trim back in place without taking the chance of scratching the paint . , if your saving the trim to reuse after paint consider polishing it while it's still in place . https://www.amazon.com/Tresalto-Auto...-1-spons&psc=1 https://67-72chevytrucks.com/vboard/...d.php?t=765868 __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

09-17-2022, 09:10 PM	#5
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,903	Re: Removing trim question Dually noted and thanks for the knowledge



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.