Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-31-2023, 01:34 PM | #26 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,901
|
Re: I'm disappointed in the direction this forum is headed
The main purpose of a vin is to identify and register the vehicle to the legal owner. These are 60 year old trucks and a lot of them didn't survive intact. They're often missing major parts, assembled from parts of many other trucks, rebuilt from reproduction parts (including repro cabs and frames built from scratch), modified into something it never was (long to short, 2wd to 4wd swap, etc). As long as the parts were sourced legally then I see nothing ethically wrong with using the vin and title from a donor truck if you're making a hodgepodge of parts into a running/driving vehicle, especially in states where it's not easy to get a new vin assigned. It's not like we're stealing trucks and swapping vins to cover up the crime... that's the kind of reason why vin laws exist, not to punish the guy that's trying to rebuild his vintage truck.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
01-31-2023, 02:16 PM | #27 |
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: I'm disappointed in the direction this forum is headed
"...the direction this forum is headed"
US Dept of Justice says it's illegal. North Carolina Law states it's illegal. Idaho law states it's illegal. This sites rules of conduct state illegal activity is not tolerated. Threads where this activity were shown have been closed consistently for years. So this is clearly not a change in the direction of the forum.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
01-31-2023, 02:39 PM | #28 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: I'm disappointed in the direction this forum is headed
Quote:
My RetroRod project was stolen in 1987. It was legally registered in my name and my DD @ the time of the theft. It was recovered during the property forfeiture process on a drug dealer in 1988. The original VIN plate was removed/discarded by the thieves. I was given an adhesive backed foil 'sticker' (for lack of a better descript) that was basically the OE VIN 'number' w/an additional digit @ the end. The truck was never registered after (licensed but not registered) because it was non-running & trashed. That 'decal/sticker' was never attached to what was left of the OG cab long ago when I started the rebuild process. It will be attached & used upon the rebirth of the truck which is a mix of years as far as parts sourcing goes. I didn't remove the original VIN tag & the replacement was never attached to anything. Pretty sure I'm not breaking any laws but I'm betting some here will say it is.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
01-31-2023, 03:14 PM | #29 |
Catchy title goes here..
Join Date: Mar 2002
Location: Rockwell, NC
Posts: 39,767
|
Re: I'm disappointed in the direction this forum is headed
Sorry I am late to reply. Both parents are ill and they come first. The staff members that replied after me explained it. It is really simple, it is not allowed. If the OP ofn that build would like to start another build thread, great. I can not justify taking the time to find it, remove content, edit etc right now.
Thank you to all who continue to post and help folks in this amazing community. |
01-31-2023, 08:02 PM | #30 | |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,063
|
Re: I'm disappointed in the direction this forum is headed
Quote:
|
|
01-31-2023, 08:08 PM | #31 | |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,063
|
Re: I'm disappointed in the direction this forum is headed
Quote:
VIN laws are pretty clear, you cannot swap VINs from one vehicle to another. While your intention, meaning you and what you stated, isn't to cover up any type of criminal activity, the fact that you are placing a VIN plate from a completely different vehicle, albeit the same make and type of vehicle, is illegal. Despite it being difficult to get a replacement, it is still doable. They make it difficult for a reason. |
|
01-31-2023, 08:23 PM | #32 |
Registered User
Join Date: Dec 2018
Location: Dallas, PA
Posts: 551
|
Re: I'm disappointed in the direction this forum is headed
This thread has turned into a VIN thread, how about starting a new thread for VIN discussion
|
01-31-2023, 11:01 PM | #33 | |
Registered User
Join Date: Jun 2014
Location: Paul idaho
Posts: 263
|
Re: I'm disappointed in the direction this forum is headed
Just so you know, those of us who are doing builds absolutely appreciate those of you who are willing to help with issues we have. I personally look on here and try to do the same but some of you are just smarter and faster than I, you always answer before I get the chance! And that's definitely not a bad thing! Thank you guys!
Quote:
__________________
63 C10 |
|
01-31-2023, 11:02 PM | #34 |
Registered User
Join Date: Jun 2014
Location: Paul idaho
Posts: 263
|
Re: I'm disappointed in the direction this forum is headed
For all of you that enjoy helping here is my new issue https://67-72chevytrucks.com/vboard/...d.php?t=841807
Thanks in advance for your help!
__________________
63 C10 |
02-03-2023, 09:37 PM | #35 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,901
|
Re: I'm disappointed in the direction this forum is headed
Quote:
Lets say that I bought the leftover VW Bug body that the previous owner discarded when he used it's frame to build a Dune Buggy, and the vin tag from the body was attached to said Dune Buggy. I also buy a same-model year VW Bug parts car that is complete with a clean title but is wrecked and rusty and at the end of its useful life. I take the two and make one and it's registered as the parts car but using the clean body leftover from the Dune Buggy build. It's all VW vin'd, VW titled, and registered as a VW. So... I used a different (but same model/year) VW body on a VW frame and it's all registered as a VW but that's illegal because the vin tag was moved over to a better body? What point would there be in me getting a new vin assigned other than to be able to register and title the "newly built" vehicle under my ownership? The vin from the donor/frame serves that purpose 100%. Which example is legal, and which example is more correct ethically? The mixed-manufacture Dune Buggy is legal but my vin swapped VW would be illegal even though it's more of what the vin identifies it as. Being legal doesn't always mean its right or wrong, it's just the way the government thinks things should be. Sometimes they get it right, sometimes they don't, sometimes the principle behind the law is good but the technical details could use some wiggle room for common sense situations like my body swap example.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
02-03-2023, 10:24 PM | #36 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: I'm disappointed in the direction this forum is headed
Well.... unless someone is working hand-in-hand alongside me throughout my build, I guess only I'll know those specifics.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
02-03-2023, 11:21 PM | #37 | |
Registered User
Join Date: Sep 2017
Location: Rainier, WA
Posts: 152
|
Re: I'm disappointed in the direction this forum is headed
Quote:
Maybe now that he is no longer selling his 'restored gold' he will back off with his crap but not holding my breath. |
|
02-04-2023, 12:06 AM | #38 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: I'm disappointed in the direction this forum is headed
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
02-04-2023, 01:47 AM | #39 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,901
|
Re: I'm disappointed in the direction this forum is headed
I’m guessing thesamba, EB = Everett Barnes, the site owner. It’s the first forum I ever joined and the one I’ve been the most active on other than this one. Or maybe I’m wrong since I don’t know what mod he’s talking about, but should since I spend time there?
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
02-04-2023, 05:38 PM | #40 | |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,063
|
Re: I'm disappointed in the direction this forum is headed
I have to put a sentence in to reply.
Quote:
|
|
02-04-2023, 05:42 PM | #41 |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,063
|
Re: I'm disappointed in the direction this forum is headed
|
02-04-2023, 05:42 PM | #42 | |
Registered User
Join Date: Sep 2017
Location: Rainier, WA
Posts: 152
|
Re: I'm disappointed in the direction this forum is headed
Quote:
Yup, and mr 010 is the generation jones culprit |
|
02-05-2023, 11:34 AM | #43 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: I'm disappointed in the direction this forum is headed
It won't. I promised not to tell on myself.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
02-05-2023, 01:02 PM | #44 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,857
|
Re: I'm disappointed in the direction this forum is headed
We repaired a Toyota cab roll over the "legal" way was cut and weld vs remove, repair and pop rivet vin. Most body shops have proper rivets.
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
02-06-2023, 02:23 AM | #45 |
Registered User
Join Date: Apr 2013
Location: Houston,Tx
Posts: 790
|
Re: I'm disappointed in the direction this forum is headed
Technology has hurt this and many forums.. smart phones make it easy to just upload a pic to Facebook/Instagram instantly, where to upload a pic via computer takes "more effort" lol. The quality definitely isn't there on social media. Social media was new and sexy and pulled alot of people away.. I think people will migrate back to the forums. Well the hardcore guys anyways.
__________________
1966 C10 "Mary" 1972 C10 Cheyenne "Betty" https://67-72chevytrucks.com/vboard/...d.php?t=847364 1979 C10 Silverado "The BIG TEN" https://67-72chevytrucks.com/vboard/...d.php?t=841339 C10 Club Texas -HMIC |
02-06-2023, 10:16 AM | #46 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: I'm disappointed in the direction this forum is headed
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
02-08-2023, 02:01 PM | #47 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,901
|
Re: I'm disappointed in the direction this forum is headed
Mr 010 isn't liked by people that are still hung up on the 009 being the greatest thing ever because he points out how much better other options (like the 010) are.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
Bookmarks |
|
|