Square Body side gas tank in 63 C10?

[ViatminC10]

Anyone tried installing a fuel tank from a square body pickup onto a 63 C10?
wonder if it would work?
Please let me know ya'lls thoughts

[62c30]

I would assume not without a lot of work if you're talking about the trucks tank on the side not blazer. I have an 85 I put a tank in a few years ago and I would think the rear cab mount on the 63 would get in the way. Plus the way the back cab wall slopes down. I can look tomorrow at my 85 and my 62, but I would assume not without a lot of work. I doubt it would even work with my 9 foot bed.

[ViatminC10]

thanks for reply. Look what I found on ebay

https://www.ebay.com/itm/39423047219....c100903.m5276

[The Rocknrod]

I see a problem:
Silver Aluminum 17 Gallon Street Rod Fuel Cell Gas Tank w/ Cap & Level Sender
Tank Measures: 30"(L) X17"(W) X7" (H)
8 AN Fuel Pickup
8 AN Rollover Vent
8 AN Fuel Return
Capacity: 17 Gallon / 64 L
Fuel sender: 0-90 Ohm
1.75" Filler Neck With Cap

[ViatminC10]

Originally Posted by The Rocknrod

I see a problem:
Silver Aluminum 17 Gallon Street Rod Fuel Cell Gas Tank w/ Cap & Level Sender
Tank Measures: 30"(L) X17"(W) X7" (H)
8 AN Fuel Pickup
8 AN Rollover Vent
8 AN Fuel Return
Capacity: 17 Gallon / 64 L
Fuel sender: 0-90 Ohm
1.75" Filler Neck With Cap

You see a problem?

[Captainfab]

Definitely made in China. I couldn't even buy the aluminum for that tank for that price.

[The Rocknrod]

Originally Posted by ViatminC10

You see a problem?

Have you changed your fuel gauge? Or do you plan to change the sender?