Arkansas K10 - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**davischevy** · 03-12-2023, 01:43 PM

Quote:

Originally Posted by Orange71shorty

That looks awesome, how did they do that? I need to do the same with my original Cheyenne super carpet

I cut it out of the old carpet. Then I scraped the old carpet off the back of the rubber piece.

I installed the carpet in the truck and cut the hole, then located the rubber piece over it and located the holes. I put four screws through the carpet to hold the piece in place. I pulled the carpet out and took it to the upholstery shop and they sewed it in.

If you have the old carpet you could lay it over the new one and mark the hole with chalk.

**davischevy** · 03-12-2023, 03:46 PM

A couple of fresh pics.

**Orange71shorty** · 03-12-2023, 04:11 PM

Quote:

Originally Posted by davischevy

I cut it out of the old carpet. Then I scraped the old carpet off the back of the rubber piece.

I installed the carpet in the truck and cut the hole, then located the rubber piece over it and located the holes. I put four screws through the carpet to hold the piece in place. I pulled the carpet out and took it to the upholstery shop and they sewed it in.

If you have the old carpet you could lay it over the new one and mark the hole with chalk.

Thanks Larry, I’ve been wanting new carpet but knew you can’t get it with that piece. Your truck is looking perfect!

72 tigger · 03-12-2023, 07:43 PM

Thanks for the new pics- nice!

**davischevy** · 03-18-2023, 12:20 PM

The seat is in. TKCR restored seat belts.

**TKCR** · 03-18-2023, 01:32 PM

That looks awesome! Just Beautiful!

**Louisvillekytruck** · 03-18-2023, 03:53 PM

Beautiful work larry looks great

Killer Bee · 03-18-2023, 06:02 PM

outstanding!

72 tigger · 03-18-2023, 09:39 PM

Looks great Larry

**Orange71shorty** · 03-18-2023, 10:00 PM

Quote:

Originally Posted by davischevy

The seat is in. TKCR restored seat belts.

Where did you source your seat cover? I need the same one for my 71k20

**davischevy** · 03-18-2023, 10:52 PM

Quote:

Originally Posted by Orange71shorty

Where did you source your seat cover? I need the same one for my 71k20

Truck World is best but virtually impossible to get. CARS Inc is a good choice. PUI usually has yhem.

cak20 · 03-19-2023, 01:54 PM

looks great, love the saddle interior.

**allchevy58** · 03-19-2023, 06:42 PM

Nice work.

**IronCanine** · 03-19-2023, 07:46 PM

It just doesn't get any better than this truck. Every detail perfect. From the firewall mark (such a high pressure proposition) to the carpet vinyl. She's an 11 out of 10 and you're not even done yet. Future C10 Nationals "Best of" winner IMO. Can't wait for more pics.

P.S. Smart to leave the doors off while working on the interior.

**Ol Blue K20** · 03-20-2023, 09:34 AM

They look great!

57taskforce · 03-20-2023, 02:28 PM

Awesome work Larry

67C10Step · 03-20-2023, 04:00 PM

Whew! Hurts my eyes it looks so good.

**davischevy** · 04-17-2023, 09:44 PM

I took the K10 for a drive down the street and back.

**IronCanine** · 04-17-2023, 10:28 PM

Big milestone! Here's to ya!!

Killer Bee · 04-17-2023, 11:15 PM

awesome! wish I was there to celebrate with you!

keep up the great work, you'll be crossing the finish line before you know it!

**Ol Blue K20** · 04-18-2023, 05:00 PM

Awesome Larry!

57taskforce · 08-27-2023, 03:37 PM

Sooooo….. what has other Larry and the AR-kansas

K10 been up too lately???

72 tigger · 08-27-2023, 06:55 PM

Quote:

Originally Posted by 57taskforce

Sooooo….. what has other Larry and the AR-kansas

K10 been up too lately???

I think other Larry has been occupied with his new house

I would guess the K10 has been busy collecting dust?

**davischevy** · 08-28-2023, 11:14 AM

The house has consumed my time lately. My doors are at the body shop reportedly ready for paint. I have driven the truck down the street a few times.

billneumiller · 10-17-2023, 03:42 AM

Larry,

I created valve cover decals for my truck. Do you need them for yours?

Bill

03-12-2023, 03:46 PM	#277
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: Arkansas K10 A couple of fresh pics. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-12-2023, 07:43 PM	#279
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,250	Re: Arkansas K10 Thanks for the new pics- nice! __________________ 71 C10 72 K20 72 K10 Super Kirk

03-18-2023, 12:20 PM	#280
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: Arkansas K10 The seat is in. TKCR restored seat belts. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

03-18-2023, 01:32 PM	#281
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,979	Re: Arkansas K10 That looks awesome! Just Beautiful! __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

03-18-2023, 03:53 PM	#282
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,109	Re: Arkansas K10 Beautiful work larry looks great

03-18-2023, 06:02 PM	#283
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,809	Re: Arkansas K10 outstanding! __________________ *I started out with nothing - and I still have most of it*

03-18-2023, 09:39 PM	#284
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,250	Re: Arkansas K10 Looks great Larry __________________ 71 C10 72 K20 72 K10 Super Kirk

03-19-2023, 01:54 PM	#287
cak20 Registered User Join Date: Jul 2021 Location: Des Moines Posts: 33	Re: Arkansas K10 looks great, love the saddle interior.

03-19-2023, 06:42 PM	#288
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,440	Re: Arkansas K10 Nice work. __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

03-19-2023, 07:46 PM	#289
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: Arkansas K10 It just doesn't get any better than this truck. Every detail perfect. From the firewall mark (such a high pressure proposition) to the carpet vinyl. She's an 11 out of 10 and you're not even done yet. Future C10 Nationals "Best of" winner IMO. Can't wait for more pics. P.S. Smart to leave the doors off while working on the interior. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

03-20-2023, 09:34 AM	#290
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Arkansas K10 They look great! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

03-20-2023, 02:28 PM	#291
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: Arkansas K10 Awesome work Larry __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

03-20-2023, 04:00 PM	#292
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,475	Re: Arkansas K10 Whew! Hurts my eyes it looks so good. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

04-17-2023, 09:44 PM	#293
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: Arkansas K10 I took the K10 for a drive down the street and back. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

04-17-2023, 10:28 PM	#294
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: Arkansas K10 Big milestone! Here's to ya!! __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."



Register or Log In To remove these advertisements.

04-17-2023, 11:15 PM	#295
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,809	Re: Arkansas K10 awesome! wish I was there to celebrate with you! keep up the great work, you'll be crossing the finish line before you know it! __________________ *I started out with nothing - and I still have most of it*

04-18-2023, 05:00 PM	#296
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Arkansas K10 Awesome Larry! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

08-27-2023, 03:37 PM	#297
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: Arkansas K10 Sooooo….. what has other Larry and the AR-kansas K10 been up too lately??? __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

08-28-2023, 11:14 AM	#299
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: Arkansas K10 The house has consumed my time lately. My doors are at the body shop reportedly ready for paint. I have driven the truck down the street a few times. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

10-17-2023, 03:42 AM	#300
billneumiller Registered User Join Date: Apr 2013 Location: Minnetonka, MN Posts: 81	Re: Arkansas K10 Larry, I created valve cover decals for my truck. Do you need them for yours? Bill Attached Images __________________ 1972 C10 Cheyenne Super SWB 1969 Camaro Z28 59K mile survivor 2015 GMC Sierra Denali–DD

Register or Log In To remove these advertisements.