The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-17-2023, 12:05 PM   #4026
doug_p
Registered User
 
doug_p's Avatar
 
Join Date: Sep 2014
Location: Yorktown, VA
Posts: 95
Re: What did you do to your truck today.The 3rd chapter

Finished kilmat installation in the drivers side foot well and adjusted the clutch pedal to sit at the same height as the brake pedal, both of which are now approximately 2.5" above throttle pedal height. Unfortunately no pics here at work =(
__________________
Doug P
Yorktown, Virginia
1962 C10 LBFS - in pieces currently
1967 C10 SBFS
and a couple non-trucks
doug_p is offline   Reply With Quote
Old 07-17-2023, 12:16 PM   #4027
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by LNP View Post
Maybe it was powder coated
In 68 ? I highly doubt that . But it’s back together regardless.
Attached Images
 
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 07-17-2023, 04:27 PM   #4028
Jiggers72-GMC
Senior Member
 
Jiggers72-GMC's Avatar
 
Join Date: Mar 2021
Location: up North
Posts: 550
Re: What did you do to your truck today.The 3rd chapter

Well done Mark, it looks great ......... new old stock
__________________
Gerry, North Bay Ontario
1971 Chevy K10 short stepper, 518 med green & white
1972 GMC C1500 long box, dark Brown, owned since 1977
1969 GMC C2500 manual
Jiggers72-GMC is offline   Reply With Quote
Old 07-17-2023, 05:25 PM   #4029
LNP
Registered User
 
Join Date: Mar 2014
Location: Pekin, Illinois
Posts: 442
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by 72c20customcamper View Post
In 68 ? I highly doubt that . But it’s back together regardless.
I'm not sure when part manufacturers started using powder coating but I do know it was invented in the 40's. Either way that looks great.
__________________
Harley

1969 Chevy C-10 Long Bed, 350cid, 700R4
LNP is offline   Reply With Quote
Old 07-17-2023, 06:17 PM   #4030
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by LNP View Post
I'm not sure when part manufacturers started using powder coating but I do know it was invented in the 40's. Either way that looks great.
Not doubting the timeframe . Lots of new cars have powder coated parts as the price is reasonable and longevity is needed . Around that time it was keep the line moving and sell those trucks . They didn’t care about 5 or 6 year old parts rusting :lol.

Now the heater box looks bad . That will be this falls project should have done it when I painted the interior .
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 07-17-2023, 06:19 PM   #4031
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by Jiggers72-GMC View Post
Well done Mark, it looks great ......... new old stock
Helps when the part is nice to begin with . Thanks for the compliment
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 07-17-2023, 07:41 PM   #4032
3757chevy
Senior Member

 
3757chevy's Avatar
 
Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 4,065
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by 69Penka View Post
I bought and installed a paint protector that goes around the ignition bezel, i installed some '72 DG4 mirrors that are in super good condition i bought on CL for $30.00 and I drilled the holes to install my lower trim moldings in prep for paint.
Quote:
Originally Posted by Rich72C10 View Post
Where you get that paint protector? I could use one of those.
Quote:
Originally Posted by 3757chevy View Post
I was wondering the same thing.
Well after searching forever on my own for 2 weeks I found and ordered 2 from JLFabrication.com ...https://jlfabrication.com/collection...b6903769&_ss=r , hope this helps you Rich72C10.
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013)
'67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010)
My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056
MIKE

Last edited by 3757chevy; 07-19-2023 at 02:33 PM.
3757chevy is offline   Reply With Quote
Old 07-19-2023, 08:05 PM   #4033
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do to your truck today.The 3rd chapter

Got the lighter working . I ended up buying a complete cigar lighter at Autozone it fit the bezel perfectly and had regular flat male connectors so it was easy enough to wire it up . And the chrome socket looks right at home in the truck
Attached Images
  
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.

Last edited by 72c20customcamper; 07-20-2023 at 09:21 AM. Reason: Stupid autocorrect
72c20customcamper is offline   Reply With Quote
Old 07-19-2023, 10:16 PM   #4034
un4gvn!
Registered User
 
un4gvn!'s Avatar
 
Join Date: Mar 2006
Location: Latrobe, Pa. 15650
Posts: 351
Re: What did you do to your truck today.The 3rd chapter

Decided to put the inner front wheel wells back on. I drove this truck for years with out them. It was easier to work around the engine compartment with out them being in the way. Plus we raced this truck and it made the truck a little lighter plus the help of other parts we took off. Every thing missing is going back on. Racing is over for me.
Attached Images
  
un4gvn! is offline   Reply With Quote
Old 07-19-2023, 10:26 PM   #4035
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
Re: What did you do to your truck today.The 3rd chapter

Looked at prices at a couple of vendors for a replacement grill and some components. Big differences, as in hundreds of dollars for what seem to be similar products. Crazy. I really wish my FiL hadn't butchered the original grill.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 07-20-2023, 10:41 AM   #4036
Chevys4life
Registered User
 
Join Date: Jun 2018
Location: Washington, DC
Posts: 671
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by un4gvn! View Post
Decided to put the inner front wheel wells back on. I drove this truck for years with out them. It was easier to work around the engine compartment with out them being in the way. Plus we raced this truck and it made the truck a little lighter plus the help of other parts we took off. Every thing missing is going back on. Racing is over for me.
I had to replace my heater core on mine and need to put it back in. It has some rust and don't feel like fixing it and considered just buying new ones. There is always something to do on these old trucks.
Chevys4life is offline   Reply With Quote
Old 07-20-2023, 01:05 PM   #4037
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by Chevys4life View Post
I had to replace my heater core on mine and need to put it back in. It has some rust and don't feel like fixing it and considered just buying new ones. There is always something to do on these old trucks.
The rust would most likely be easier to fix than getting aftermarket inner aprons to fit right .
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 07-20-2023, 01:29 PM   #4038
un4gvn!
Registered User
 
un4gvn!'s Avatar
 
Join Date: Mar 2006
Location: Latrobe, Pa. 15650
Posts: 351
Re: What did you do to your truck today.The 3rd chapter

These are the original GM inners and they were not fun to install. Getting all the holes to line up wasn't easy. We used Chineese inners on our 68 and they went right on. I antisapated (if that's how to spell it) the GM inners were going to be a snap. It took one complete day to install but no drill was used. Lots of putting screw drivers in the holes and lots of prying.
un4gvn! is offline   Reply With Quote
Old 07-20-2023, 03:13 PM   #4039
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by un4gvn! View Post
These are the original GM inners and they were not fun to install. Getting all the holes to line up wasn't easy. We used Chineese inners on our 68 and they went right on. I antisapated (if that's how to spell it) the GM inners were going to be a snap. It took one complete day to install but no drill was used. Lots of putting screw drivers in the holes and lots of prying.
Never had a problem removing and reinstalling originals . I tried aftermarket’s on my 68 and abandoned that adventure . My originals were nice but I found a set of Arizona take offs . So I still have originals for my next project.
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 07-21-2023, 03:47 PM   #4040
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do to your truck today.The 3rd chapter

Something every day or week . I used striping tape to get the hood lip white . Just wanted to make sure I liked it prior to painting . I posted it in my hood thread too
Attached Images
  
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.

Last edited by 72c20customcamper; 07-22-2023 at 06:27 PM.
72c20customcamper is offline   Reply With Quote
Old 07-21-2023, 04:21 PM   #4041
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
Re: What did you do to your truck today.The 3rd chapter

^ I like it!
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Old 07-21-2023, 04:49 PM   #4042
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by Steeveedee View Post
^ I like it!
Me too . Guess I’ll be painting next time I paint up some rims
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 07-22-2023, 12:21 PM   #4043
UNEASYRIDER
Registered User
 
UNEASYRIDER's Avatar
 
Join Date: Apr 2009
Location: PHOENIX,ARIZONA
Posts: 91
Re: What did you do to your truck today.The 3rd chapter

Making a new cab cover!
Attached Images
 
__________________
DON'T BUILD IT IF YOUR NOT GONA DRIVE IT!!
UNEASYRIDER is offline   Reply With Quote
Old 07-22-2023, 10:29 PM   #4044
body bolt
Registered User
 
Join Date: Oct 2020
Location: Albuquerque, New Mexico
Posts: 474
Re: What did you do to your truck today.The 3rd chapter

I intentionally drove off a curb I thought would be no problem and knocked my exhaust pipe loose. Guess what I'm doing tomorrow...
body bolt is offline   Reply With Quote
Old 07-22-2023, 10:34 PM   #4045
'68OrangeSunshine
Senior Member
 
'68OrangeSunshine's Avatar
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,505
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by UNEASYRIDER View Post
Making a new cab cover!
That will keep the Sun out of the cab.
Home Depot sells this silver-mylar backed bubble wrap stuff by the roll. You could line that Cab Cap with the silver stuff and really keep your cab cool. Or cut out panels matching the windows and fix them on the inside. Auto parts stores sell accordian-folded sheets of the stuff pre-cut for the front windshield, but if you're parked in full sun all day, the angle shifts. The rolls are cheaper than the pre-cut shields.
Long time Tucsonan here. We have the same problem.
__________________


Every 25 years I like to rebuild that 292, whether it needs it or not.
'68OrangeSunshine is offline   Reply With Quote
Old 07-23-2023, 12:56 AM   #4046
pjmoreland
Senior Member

 
pjmoreland's Avatar
 
Join Date: Jan 2005
Location: CA
Posts: 5,988
Re: What did you do to your truck today.The 3rd chapter

Getting close to being done with the A/C install. Did a leak test and it passed. Next step is to put in the refrigerant.
Attached Images
    
pjmoreland is offline   Reply With Quote
Old 07-23-2023, 01:02 AM   #4047
'68OrangeSunshine
Senior Member
 
'68OrangeSunshine's Avatar
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,505
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by pjmoreland View Post
Getting close to being done with the A/C install. Did a leak test and it passed. Next step is to put in the refrigerant.
Rocky Raccoon's coming along nicely.
Did you always have a puke tank? I hadn't noticed before.
__________________


Every 25 years I like to rebuild that 292, whether it needs it or not.
'68OrangeSunshine is offline   Reply With Quote
Old 07-23-2023, 01:06 AM   #4048
pjmoreland
Senior Member

 
pjmoreland's Avatar
 
Join Date: Jan 2005
Location: CA
Posts: 5,988
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by '68OrangeSunshine View Post
Rocky Raccoon's coming along nicely.
Did you always have a puke tank? I hadn't noticed before.
I added that a little while ago. Got it from PICKMUP

https://67-72chevytrucks.com/vboard/...d.php?t=607136
pjmoreland is offline   Reply With Quote
Old 07-23-2023, 03:42 AM   #4049
'68OrangeSunshine
Senior Member
 
'68OrangeSunshine's Avatar
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,505
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by pjmoreland View Post
I added that a little while ago. Got it from PICKMUP

https://67-72chevytrucks.com/vboard/...d.php?t=607136
OK. Cool. I got the Nova type a few years ago. Tucks in next to the Batt and follows the curve of the Fender Skirt. Had it in my Stepside w/ 292, but L6s run so cool, I didn't need it. I pulled it from OrangeSunshine and put it in the '71 GMC Jimmy [Blue Thunder]. In April, I had the radiator resoldered. New 160* thermostat. I changed the Radiator Cap to a non-vent lever type, but still 16#. It does not seem to be filling the reserve tank.
I probably need to put on longer bolts and a new gasket w/ RTV on the Thermostat housing, since I get a lot of green glycol residue there on top of the intake manifold. So the system is not ''closed'' enough.
I did get a vapor lock up, after a shut down stop last Tuesday, in 112* heat outside, on a Tucson late afternoon. But the 350 started up on the 3rd or 4th try.
Autometer mechanical temp gauge only indicated 180*.
__________________


Every 25 years I like to rebuild that 292, whether it needs it or not.

Last edited by '68OrangeSunshine; 07-23-2023 at 03:52 AM.
'68OrangeSunshine is offline   Reply With Quote
Old 07-23-2023, 09:49 AM   #4050
pjmoreland
Senior Member

 
pjmoreland's Avatar
 
Join Date: Jan 2005
Location: CA
Posts: 5,988
Re: What did you do to your truck today.The 3rd chapter

Quote:
Originally Posted by '68OrangeSunshine View Post
Autometer mechanical temp gauge only indicated 180*.
I noticed that my truck runs cooler after I added the puke tank. I'm assuming it's because now the radiator can be filled all the way to the top.
pjmoreland is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com