Dissembling a tilt column - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pjmoreland** · 09-27-2023, 04:21 PM

Quote:

Originally Posted by 67sss

knob should have a screw in it.

Ok, thanks. Mine is like that.

**pjmoreland** · 09-27-2023, 06:58 PM

The 12-sided nut at the top of the column that tensions the bearings seems to be some sort of oddball size. The closest 12-point wrench is 23mm, but it is pretty loose. I cut a slit in a 23mm box end wrench and clamped it on there with vise grips to make it tight.

09-27-2023, 06:58 PM	#27
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,241	Re: Dissembling a tilt column The 12-sided nut at the top of the column that tensions the bearings seems to be some sort of oddball size. The closest 12-point wrench is 23mm, but it is pretty loose. I cut a slit in a 23mm box end wrench and clamped it on there with vise grips to make it tight. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.