CA Gauge Cluster Decals for 5000, 8000 RPM Tach, Vac, KPH, MPH, Trans Temp, Boost, etc. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pjmoreland** · 12-05-2023, 06:23 PM

Quote:

Originally Posted by CarlsLQ9SS

First shipment received, they look really good!
Thanks

I'm glad to hear it!

**pjmoreland** · 12-08-2023, 02:12 AM

I also have regular 5k tach decals available.

**CarlsLQ9SS** · 12-10-2023, 03:44 PM

Second shipment arrived safe and sound, good work!

**pjmoreland** · 12-10-2023, 03:51 PM

Quote:

Originally Posted by CarlsLQ9SS

Second shipment arrived safe and sound, good work!

Thanks! Post some photos once you install them, if you don't mind

**CarlsLQ9SS** · 12-10-2023, 04:34 PM

Will do, I’m building an extra set of gauges with the s10 speedo conversion for a Ls swap. The stencil for the conversion is a paint type and is the reason I was asking about that on the other post. I’m excited to see how it turns out and glad it will be in the correct font

**Canuckvetter** · 12-14-2023, 08:14 PM

The decals arrived today. Just have to dig out a lens and polish it up.
Thnx again.
Michael

**pjmoreland** · 12-15-2023, 01:43 AM

Quote:

Originally Posted by Canuckvetter

The decals arrived today. Just have to dig out a lens and polish it up.
Thnx again.
Michael

I'm glad they arrived safely

**clay68c10** · 02-15-2024, 12:34 PM

I'll take an 8K tach decal if you have any
Thanks

**pjmoreland** · 02-15-2024, 01:02 PM

Quote:

Originally Posted by clay68c10

I'll take an 8K tach decal if you have any
Thanks

Sounds good. I'll send you a PM.

**pjmoreland** · 02-19-2024, 07:09 PM

Quote:

Originally Posted by clay68c10

I'll take an 8K tach decal if you have any
Thanks

Mailed 8k tach decal, although the post office is closed today.

**pjmoreland** · 03-28-2024, 11:35 PM

Here's a video that shows how to install a tach decal.

https://youtube.com/shorts/QPzylsrfP-w?feature=shared

**pjmoreland** · 06-28-2024, 06:33 PM

I have these automatic tilt column shift indicator decals to offer. They are modeled off of the text of a factory indicator (NOS and van text are different). One style is the stock layout with PRNDL2L1, and the other style is PRNDM for use with a modern transmission such as the 6L90E that has a "Manual" mode.

**Getter-Done** · 06-29-2024, 10:47 AM

Very Nice

These will Update an Updated truck.

Nice job.

**Dave** · 11-11-2024, 08:27 AM

Patrick,
I'd like to get 2 5k tach lens decals and 2 vacuum lens decals.
Also, do you have anything for the vacuum gauge and tach faces?
Thank you

**pjmoreland** · 11-11-2024, 12:32 PM

Quote:

Originally Posted by Dave

Patrick,
I'd like to get 2 5k tach lens decals and 2 vacuum lens decals.
Also, do you have anything for the vacuum gauge and tach faces?
Thank you

Dave, I have those decals already made and ready to go. I don't make any gauge face decals, but I have bought them from this place:

https://www.whitegauges.net/products...ce-Gauges.html

Andrew S · 11-11-2024, 04:22 PM

I would like to purchase a 5k tach decal, and a vacuum decal, please. Thank you!

**pjmoreland** · 11-11-2024, 04:24 PM

Quote:

Originally Posted by Andrew S

I would like to purchase a 5k tach decal, and a vacuum decal, please. Thank you!

Sounds great. I sent you a PM.

**pjmoreland** · 11-11-2024, 09:01 PM

Quote:

Originally Posted by Andrew S

I would like to purchase a 5k tach decal, and a vacuum decal, please. Thank you!

I dropped your decals off at the post office just now. They will go out tomorrow.

**Dave** · 11-11-2024, 09:38 PM

Quote:

Originally Posted by pjmoreland

Dave, I have those decals already made and ready to go. I don't make any gauge face decals, but I have bought them from this place:

https://www.whitegauges.net/products...ce-Gauges.html

PM sent

**pjmoreland** · 11-13-2024, 03:03 AM

Quote:

Originally Posted by Dave

PM sent

Dropped your decals in the mail this morning.

**Dave** · 11-20-2024, 08:13 PM

Quote:

Originally Posted by pjmoreland

Dave, I have those decals already made and ready to go. I don't make any gauge face decals, but I have bought them from this place:

https://www.whitegauges.net/products...ce-Gauges.html

Patrick,
Decals arrived today and look absolutely perfect. Thank you.

**pjmoreland** · 11-20-2024, 08:14 PM

Quote:

Originally Posted by Dave

Patrick,
Decals arrived today and look absolutely perfect. Thank you.

I'm glad to hear it!

**stubs** · 11-21-2024, 05:11 AM

OMG this is a life saver I'm building restmod and it's running a supercharger and I wanted a boost gauge give me couple of days to get my gauge cluster out and see what's what but I'm interested for sure

**pjmoreland** · 11-21-2024, 01:32 PM

Quote:

Originally Posted by stubs

OMG this is a life saver I'm building restmod and it's running a supercharger and I wanted a boost gauge give me couple of days to get my gauge cluster out and see what's what but I'm interested for sure

Sounds good. Let me know.

1967GMCC20 · 11-21-2024, 02:29 PM

Are the repo tachs at Summit any good?

12-08-2023, 02:12 AM	#27
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,249	Re: Decals for 8000 RPM Tach and Vacuum I also have regular 5k tach decals available. Attached Images Last edited by pjmoreland; 12-14-2023 at 08:53 PM.

12-10-2023, 03:44 PM	#28
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: Decals for 8000 RPM Tach and Vacuum Second shipment arrived safe and sound, good work! __________________ Carl 1971 GMC short bed, (Henry) Options I've added, tilt, ac, 8k tach, Electric speedometer conversion for LS swap, 6.0 with 823 heads and BTR stage 4 truck cam, 4L80e, posi with 3.73 rear end, Power steering and power brakes Lowered 5/7. Frame up build.

12-10-2023, 04:34 PM	#30
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: Decals for 8000 RPM Tach and Vacuum Will do, I’m building an extra set of gauges with the s10 speedo conversion for a Ls swap. The stencil for the conversion is a paint type and is the reason I was asking about that on the other post. I’m excited to see how it turns out and glad it will be in the correct font __________________ Carl 1971 GMC short bed, (Henry) Options I've added, tilt, ac, 8k tach, Electric speedometer conversion for LS swap, 6.0 with 823 heads and BTR stage 4 truck cam, 4L80e, posi with 3.73 rear end, Power steering and power brakes Lowered 5/7. Frame up build.

12-14-2023, 08:14 PM	#31
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,051	Re: Decals for 8000 RPM Tach and Vacuum The decals arrived today. Just have to dig out a lens and polish it up. Thnx again. Michael __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

02-15-2024, 12:34 PM	#33
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,995	Re: Decals for 8000 RPM Tach and Vacuum I'll take an 8K tach decal if you have any Thanks __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

03-28-2024, 11:35 PM	#36
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,249	Re: Decals for 8000 RPM Tach and Vacuum Here's a video that shows how to install a tach decal. https://youtube.com/shorts/QPzylsrfP-w?feature=shared

06-28-2024, 06:33 PM	#37
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,249	Re: Decals for 8000 RPM Tach and Vacuum I have these automatic tilt column shift indicator decals to offer. They are modeled off of the text of a factory indicator (NOS and van text are different). One style is the stock layout with PRNDL2L1, and the other style is PRNDM for use with a modern transmission such as the 6L90E that has a "Manual" mode. Attached Images

06-29-2024, 10:47 AM	#38
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,683	Re: Decals for 8000 RPM Tach and Vacuum Very Nice These will Update an Updated truck. Nice job. __________________ ________________________________________________________________________________________ ____________________________________________ The early bird gets the worm, But the second mouse gets the cheese 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

11-11-2024, 08:27 AM	#39
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,404	Re: Decals for 8000 RPM Tach and Vacuum Patrick, I'd like to get 2 5k tach lens decals and 2 vacuum lens decals. Also, do you have anything for the vacuum gauge and tach faces? Thank you

11-11-2024, 04:22 PM	#41
Andrew S Registered User Join Date: Apr 2012 Location: North Central Washington Posts: 65	Re: Decals for 8000 RPM Tach and Vacuum I would like to purchase a 5k tach decal, and a vacuum decal, please. Thank you! __________________ '72 K20

11-21-2024, 05:11 AM	#48
stubs Junior Member Join Date: May 2008 Location: spicer mn Posts: 60	Re: Decals for 8000 RPM Tach and Vacuum OMG this is a life saver I'm building restmod and it's running a supercharger and I wanted a boost gauge give me couple of days to get my gauge cluster out and see what's what but I'm interested for sure

11-21-2024, 02:29 PM	#50
1967GMCC20 Registered User Join Date: Apr 2022 Location: Medina, Ohio Posts: 238	Re: Decals for 8000 RPM Tach and Vacuum Are the repo tachs at Summit any good?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.