65 K10 Shock Absorbers?

[67JimmyMO]

Was wondering what is available for front and rear shocks for a 65 K-10.

Not having much luck searching online, just looking for an OEM-type replacement or similar, don't need coilovers or offroad type.

Has anyone found something that is actually for another vehicle that will fit, or...?

[Getter-Done]

Here's an Old thread.

With Pictures.

Link: https://67-72chevytrucks.com/vboard/...d.php?t=795412

[67JimmyMO]

Originally Posted by Getter-Done

Here's an Old thread.

With Pictures.

Link: https://67-72chevytrucks.com/vboard/...d.php?t=795412

I don't know how I missed that but that's exactly the info I was looking for...thanks Getter-Done!

[Getter-Done]

Hope these part numbers are still good.

[67JimmyMO]

Originally Posted by Getter-Done

Hope these part numbers are still good.

Numbers seem to be good and still available.

I ordered the Monroe 34944's for the front, still thinking about the back.

Here's a link to another thread that has some more pertinent info that some might find helpful, that I found in the thread that Getter-Done led me too.

https://67-72chevytrucks.com/vboard/...d.php?t=697060

Will be a while before I can install the fronts but will report back with how it goes.

[_mg]

I need this too, thanks for posting!

[67JimmyMO]

Finally got around to installing the front shocks on my 65 K10.

Pretty much a bolt-on, had no alignment issues with the bolt holes.

I stacked a few washers between the frame and the top end of the shock to fill the gap and make it stand off the approximately 1/2" as the stock shocks do.

As you can see in the pics I used the Monroe 34944s, was glad to see that they are still made in the USA.

Going to do some more study before I pull the trigger on the back shocks, but will update this thread when I do.