|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-16-2024, 09:15 PM
|
#1 |
|
Registered User
Join Date: Jan 2024
Location: EL PASO
Posts: 215
|
Distributor/Points etc etc
Fixed!
Last edited by Loose Screw; 07-17-2024 at 12:29 AM. Reason: Fixed! |
|
|
|
07-16-2024, 10:06 PM
|
#2 |
|
Senior Member
 
Join Date: Jun 2022
Location: San Ramon,CA
Posts: 657
|
Re: Distributor/Points etc etc
Working solo, I've strapped down the trigger on my timing light and laid it on the cowl so I could see it from the driver's seat. A plug tester would work also.
This way I could see when I at least had enough gap to make some kind of spark Once I got it to run badly, I could set dwell with the meter, then set initial timing. I had this problem because I had the type of points with the condenser onboard which got in the way of the feeler. You might just be able to get a paper match in there for initial gap the old school way.
__________________
1970 C10 Custom longbed 350/350 Code:
__
______|__]\____
....|___(o)_____(o)_]
|
|
|
|
|
07-16-2024, 10:08 PM
|
#3 |
|
Senior Member
Join Date: Jun 2022
Location: San Ramon,CA
Posts: 657
|
Re: Distributor/Points etc etc
sanding the points with a little bit of Emery paper first is a good start
__________________
1970 C10 Custom longbed 350/350 Code:
__
______|__]\____
....|___(o)_____(o)_]
|
|
|
|
|
07-17-2024, 12:31 AM
|
#4 |
|
Registered User
Join Date: Jan 2024
Location: EL PASO
Posts: 215
|
Re: Distributor/Points etc etc
Wired the Distributor wrong!
Last edited by Loose Screw; 07-17-2024 at 12:32 AM. Reason: Fixed! |
|
|
|
|
07-17-2024, 01:34 AM
|
#5 | |
|
Senior Member
Join Date: Jun 2022
Location: San Ramon,CA
Posts: 657
|
Re: Distributor/Points etc etc
Quote:
__________________
1970 C10 Custom longbed 350/350 Code:
__
______|__]\____
....|___(o)_____(o)_]
|
|
|
|
|
|
07-18-2024, 08:43 AM
|
#6 |
|
Registered User
Join Date: Apr 2022
Location: Medina, Ohio
Posts: 232
|
Re: Distributor/Points etc etc
I have wired coil backwards before.
I've also taken several coils to test spark. And once the most beat up, dented coil I had was best. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
