Looking for Step Bars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CareTaker · 08-27-2004, 04:49 PM

I have a '72 Blazer with a 6' chasis lift and have discovered that some people actually have issues geting into my truck. I figure a set of step bars would be helpful - I just can't seem to find them anywhere. I have contacted Iron Horse and Smitty Built and have struck out. Thought I would hit you all up and see if you could help me out...

bouncytruck · 08-27-2004, 05:25 PM

Your probably not going to find anyone that makes them specifically for your Blazer. The rocker boxes make them a little difficult to mount, but it can be done. I've seen pictures of a few with the tube style and custom brackets that mount to the frame. The other option is to find the loops with a flat-horizontal mounting point and drill up into the rocker boxes. This is what I intended to do with my '69, it actually happening questionable. The down side to the steps or loops is that if you 4x4 it at all, they may suffer some damage, or worse, damage your truck.

By the way, welome to the board from Seattle! Post some pictures of your truck when you get a chance.

CareTaker · 08-30-2004, 10:28 PM

Thanks for the info....gives me something else to look forward to fabricating. Who knew how much fun you could have with a stick welder, a hammer, and an adventurous attitude.

I have one picture posted - and will post others as it comes together.

Lippyp · 08-31-2004, 07:14 AM

Carry a an old wooden box with a piece of rope attached so they can haul it in behind them once they've used it as a step to get in or alternatively stop giving lifts to people with short legs!

*Gee_Emm* · 08-31-2004, 09:04 AM

Welcome from Canada, I hope you mean your Blazer has a 6 inch lift and not a 6 foot lift :p

08-27-2004, 04:49 PM	#1
CareTaker Registered User Join Date: Sep 2003 Location: Idaho - Boise Posts: 10	Looking for Step Bars I have a '72 Blazer with a 6' chasis lift and have discovered that some people actually have issues geting into my truck. I figure a set of step bars would be helpful - I just can't seem to find them anywhere. I have contacted Iron Horse and Smitty Built and have struck out. Thought I would hit you all up and see if you could help me out... __________________ "You have the rest of your life to solve your problems. How long you live depends on how well you do it." -Clint Smith Me - 1972 Chevy Blazer 4x4 with a 6" lift Her - 1968 Pickup daily Driver soon to be a Street Rod

08-27-2004, 05:25 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Your probably not going to find anyone that makes them specifically for your Blazer. The rocker boxes make them a little difficult to mount, but it can be done. I've seen pictures of a few with the tube style and custom brackets that mount to the frame. The other option is to find the loops with a flat-horizontal mounting point and drill up into the rocker boxes. This is what I intended to do with my '69, it actually happening questionable. The down side to the steps or loops is that if you 4x4 it at all, they may suffer some damage, or worse, damage your truck. By the way, welome to the board from Seattle! Post some pictures of your truck when you get a chance. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

08-30-2004, 10:28 PM	#3
CareTaker Registered User Join Date: Sep 2003 Location: Idaho - Boise Posts: 10	Thanks for the welcome!! Thanks for the info....gives me something else to look forward to fabricating. Who knew how much fun you could have with a stick welder, a hammer, and an adventurous attitude. I have one picture posted - and will post others as it comes together. __________________ "You have the rest of your life to solve your problems. How long you live depends on how well you do it." -Clint Smith Me - 1972 Chevy Blazer 4x4 with a 6" lift Her - 1968 Pickup daily Driver soon to be a Street Rod

08-31-2004, 07:14 AM	#4
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	Carry a an old wooden box with a piece of rope attached so they can haul it in behind them once they've used it as a step to get in or alternatively stop giving lifts to people with short legs! __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

08-31-2004, 09:04 AM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Welcome from Canada, I hope you mean your Blazer has a 6 inch lift and not a 6 foot lift :p



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.