Vacuum canister lines

[1986Silverado]

Anyone have a diagram or picture showing how the vacumm line from the canister is connected and to what/where? Thanks

[Slonaker]

I have a scan from a book of my vacuum routing sticker from under the hood. I think it shows that stuff, but I'm not sure. It might not be the same, but you are welcome to it, if you want it, after I get home.

If you want it, and I forget to post it, PM or email me. I forget that kind of stuff usually...

Slonaker

EDIT:

Here you go:

[1986Silverado]

Originally Posted by Slonaker

I have a scan from a book of my vacuum routing sticker from under the hood. I think it shows that stuff, but I'm not sure. It might not be the same, but you are welcome to it, if you want it, after I get home.

If you want it, and I forget to post it, PM or email me. I forget that kind of stuff usually...

Slonaker

EDIT:

Here you go:

Thanks for the post but that scan does not show what I am looking for. I was looking for the routing of the hose from the round canister that is located on the driver side(of my truck)Tucked close to the fire, in the corner where the fender, inner fender, and firewall meet....will try to post a pic of what I am talking about. I circled in red the round canister I was talking about.

[Slonaker]

Oh. That. I thought you wanted the location of the lines from the one labeled "canister."

I'll try to remember to see where mine goes.

Slonaker

[swervin ervin]

It hooks to the intake on a tee behind the carb (best I remember) It has a check valve in the line going to the ball. The other hose goes inside the cab over close to the heater box.