|
01-08-2005, 05:14 AM
|
#1 |
|
Senior Member
Join Date: Jan 2002
Location: calgary,Alberta,Canada
Posts: 387
|
Gasket questions
Can anyone tell me...
On the new style gaskets that have an O-ring built into them do you need to use silicon or what is recommended? The gasket I am refering to is the thermostat housing. Also I feel a little foolish asking this one but, on the exhaust manifolds I seem to remember always having the "flat side" of the gasket towards the head. However, I was told by a parts guy at a local parts store that it was the other way around with the flat side away from the head. It doesn't seem right for some reason. It has been a while and if the parts guy wasn't so sure about it, I am sure it wouldn't have come up. Can someone set me straight.  Thanks Curt
__________________
1972 CHEYENNE SUPER SWB BLACK. 402 BB, TH400, AIR, TILT, TACH, BUCKETS, CRUISE, AM/FM, 8 TRACK. My build thread: http://67-72chevytrucks.com/vboard/s...=1#post7120181 |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode