1971 CST for sale

[71Blazer]

Well I never thought this day would come but here it is just the same...

'71 K5 CST
413ci smallblock (400; .060 over)
Comp Cams HE268 cam
Comp Cams roller rockers
New Edelbrock Performer carb
New Edelbrock Performer RPM intake
New HEI distributor
New AC Delco Rapid Fire plugs
New MSD Helicore wires
New K&N 4" air filter and housing

The engine runs very strong, detailing was done to the engine compartment while the engine was out so it looks good too. This was my daily driver off and on until 2003 when I started the engine project. Below is a short history of my ownership:

2001: Purchased in Duvall, WA.

2001: Installed full carpet set (ACC- dark saddle), replaced rocker panels, installed forward roll cage (Smittybuilt), installed new front bumper, installed wood grip steering wheel (classy!).

2003: Began installation of fold-and-tumble rear seat. This project needs to be completed. Includes shoulder belts for the front seats and all the attaching hardware for the rear seat. I still have the rear seat that was in the truck when I bought it (not original). Installed original AM radio in the dash and a Sony AM/FM/CD player in the glovebox with an amp under the passenger seat.

2003-4: Engine was torn down and inspected. I replaced one bad lifter everything else looked clean and well maintained. There is a rebuild tag on the engine block that shows it was rebuilt in 1989 and bored .060 over. The crank was turned .010 under at the same time.

The rest of the drivetrain is stock; TH350, NP 205, 12bolt limited-slip rear end, both axles are 3.07 gear ratio.

I'm asking $4700 on craigslist but I've really appreciated all the help and camaraderie on this board. So if I could make a (potential?) board member happy with a solid truck to build from I'd be willing to make a deal.

For the sake of consistency I'll ask $4700 here too but make me an offer and hopefully it can stay here on this board for us all (me) to enjoy

Thanks,
Nate
Hm: 360.678.1086