|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
03-09-2005, 04:19 PM
|
#1 |
|
now thats a true COON DOG
 Join Date: Nov 2000
Location: Franconia, NH
Posts: 1,977
|
Heater issuses (not so hot)
First of all I just wanted to say HI ALL. I haven't been on in a while. Now on to the problem. I recentlly had the water pump on my inline in my burb replaced. Before I had done this the heat worked ok warm but not hot. But now I'm lucky if it even gets warm. This can make it really hard to see sometimes, because the heater can't defrost the window fast enough. I'm thinking maybe it's theres a pocket of air somewhere in the system? Although I already tryed to get any air pockets in there out. I cracked the temp sensor at the top of the engine block while I poured in more coolent to try and make sure that I got all of the air that might be in my system out. So now I'm looking for some Ideas seeing that I have run out of them. Thanks in advance -Brian
__________________
current project 67  402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!)71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled)  was my first truck!... oh well...72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!) |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode