4.3 V6 to V8 swap Questions

[beaterC10]

Does anyone know how involved a swap would be from a 4.3 V6 to a 73 vintage 350 in an 87 1/2 ton?

The 350 is a warmed up stocker with #492 heads, 2.02 intake valves, and aftermarket cam. I forget the cam specs, but it is the Summit knockoff of an Eldebrock Performer.

Would it be possible if used the following

350 throttle body from a late 80s truck
aftermarket TBI intake (to match the older style intake bolt orientation) aftermarket or stock 350 chip
change the clutch to match the older style flywheel used on the 350
V8 radiator and shroud
V8 engine mounts

I assume the 4.3 accessories should bolt onto the 350

Reason for asking is that I might be able to pickup a complete running 87 LWB with a 4.3 and A/C. I have a 84 SWB that has the 350 and a shot body.