passenger upper hinge - The 1947 - Present Chevrolet & GMC Truck Message Board Network

elvis50138 · 06-21-2005, 11:41 PM

I need to adjust the passenger side door on my 86 C10. It has some cheap aftermarket doors installed by the previous owner. I need to move the upper hinge on the pillar on the passenger side forward. I removed the door and saw that there are two bolts I could loosen from the outside. There is a third that appears to be bolted in from the interior. I removed the dash but could not find this bolt. It appears to be behind the dash metal. Is this correct? I figure there must be someway to loosen this bolt. Any suggestions?

06-21-2005, 11:41 PM	#1
elvis50138 Registered User Join Date: Sep 2004 Location: IA Posts: 118	passenger upper hinge I need to adjust the passenger side door on my 86 C10. It has some cheap aftermarket doors installed by the previous owner. I need to move the upper hinge on the pillar on the passenger side forward. I removed the door and saw that there are two bolts I could loosen from the outside. There is a third that appears to be bolted in from the interior. I removed the dash but could not find this bolt. It appears to be behind the dash metal. Is this correct? I figure there must be someway to loosen this bolt. Any suggestions?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.