Gov Lock Eaton questions, Help!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

locab36 · 08-02-2005, 09:42 PM

I have this gov lock 3.42 rearend that I want to put in my 84 short fleet. I took off the cover today to check everything out. It appears that the cam gear has teeth missing (several spreadout over the circumfrence) and the gov lock assembly is missing some teeth on 1/3 of its tiny size as well. I take it the cam and the gov lock assy. are to be full of teeth? and no missing ones? I bought this rear end w/a 30 day warrenty and plan on taking it back if these parts are indeed bad. Any help from someone w/more expertice than I here??

Thanks
John

08-02-2005, 09:42 PM	#1
locab36 Registered User Join Date: Jun 2004 Location: Midland, MI Posts: 265	Gov Lock Eaton questions, Help!! I have this gov lock 3.42 rearend that I want to put in my 84 short fleet. I took off the cover today to check everything out. It appears that the cam gear has teeth missing (several spreadout over the circumfrence) and the gov lock assembly is missing some teeth on 1/3 of its tiny size as well. I take it the cam and the gov lock assy. are to be full of teeth? and no missing ones? I bought this rear end w/a 30 day warrenty and plan on taking it back if these parts are indeed bad. Any help from someone w/more expertice than I here?? Thanks John __________________ Locab36 1936 low cab 1/2 ton 1956 BMW R25/3 1968 Moto Guzzi V7 1969 BMW R100/2 1986 Silverado SWB 2007 Harley FLHTP 2011 GMC SWB 4x4 Z71 http://www.flickr.com/photos/locab36...7623329816080/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.