Help with Dash Lights! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

POS72K10 · 12-29-2005, 02:08 AM

Im running out of Ideas (I dont have many). I cant get my dash lights to work, my turn signals work and my high beam indicator work but nothing else. Heres what Ive tried so far,
-replaced fuse (blown)
-replaced all bulbs (also blown except for ones listed above)
-checked printed circut (looks good)
-rughed up contacts to make sure everything was making a good connection
Is there supposed to be a ground between the dash and the gauge cluster?
Please Help Im lost!

12-29-2005, 02:08 AM	#1
POS72K10 Registered User Join Date: Dec 2005 Location: Box Elder S.D. Posts: 22	Help with Dash Lights! Im running out of Ideas (I dont have many). I cant get my dash lights to work, my turn signals work and my high beam indicator work but nothing else. Heres what Ive tried so far, -replaced fuse (blown) -replaced all bulbs (also blown except for ones listed above) -checked printed circut (looks good) -rughed up contacts to make sure everything was making a good connection Is there supposed to be a ground between the dash and the gauge cluster? Please Help Im lost! __________________ 72 K10 350 with 3/4 ton axles(under construction) 06 GMC Yukon XL (The Burb)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.