Wiper Motor or Switch???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

avejoe · 01-08-2006, 10:41 PM

Ok, see if you guys can figure this one out.

My wipers only have one speed. Moving the switch from the slow position to the fast position results in no change to the speed. Seems to be stuck on slow speed. After the wipers have been working for 15 or so minutes, I can't turn them off. They almost stop at the bottom, but they just keep going. The only way to stop them is to turn the key to off.

I changed the switch out.

I changed the motor out.

The problem persists.

Any thoughts?

Thanks!

01-08-2006, 10:41 PM	#1
avejoe Custer had a plan too. Join Date: Dec 2003 Location: No. California Posts: 344	Wiper Motor or Switch???? Ok, see if you guys can figure this one out. My wipers only have one speed. Moving the switch from the slow position to the fast position results in no change to the speed. Seems to be stuck on slow speed. After the wipers have been working for 15 or so minutes, I can't turn them off. They almost stop at the bottom, but they just keep going. The only way to stop them is to turn the key to off. I changed the switch out. I changed the motor out. The problem persists. Any thoughts? Thanks! __________________ 72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold ) 05 Subaru Outback for mileage

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.