![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Majician
Join Date: Nov 2004
Location: In the Middle
Posts: 329
|
I rescued a Suburban from possible demolition... *PICS*
Disclaimer - I know very little about these old Suburbans other than the fact that they look AWESOME and I had to have one.
My friend and I were out cruising my '72 C10 through the country to go look at a house he want's to buy... then I spot an old Suburban sitting in the weeds at someone's house. A week later we go out and talk to the lady that owned it and she said I could buy it for $200. We went this weekend and picked it up. It was parked a few years ago and never drove again because it needed a muffler and tires. It is a 3/4 ton 2 wheel drive with a 250 inline six with a 1 bbl carb and a 3 speed. It wasn't pumping fuel, but would start with starting fluid, so I put a new fuel pump on. It pumps fuel now, but the gas is real old and nasty and it still won't run without spraying starting fluid in it. I will work on it more as time permits. It has some bad exhaust leaks too. The trailing arms (control arms?) are JUNK. I have a few questions for you guys: Are the rear control arms the same from 1/2 to 3/4 ton and from truck to Suburban? Is there anywhere that sells new arms cheaper than LMC? Can a guy (me) who knows nothing about carbs rebuild the 1 bbl on my 250? How does the 250 do for MPG in a Suburban? And now some pics. I ran out of quaters at the car wash, so there's still a little dirt on the passenger side rear quater. ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|