Front and Rear Suspension - The 1947 - Present Chevrolet & GMC Truck Message Board Network

st1x10 · 11-06-2006, 08:50 PM

I was wanted to upgrade brakes and also need new joints on the front. Also will lower the truck at the same time. 3.5" front and 5" rear. Do I need shock relocators, adjustable track bar, and where should I get the stuff??

I was looking at http://www.p-s-t.com/truck/tvfekstd.html for their front end kit 63 -72. Then GMCPauls.com for drop spindles, 5 lug disc brakes, caliper, and springs. Looking at around $1200 for the full setup front and rear if I get adjustable track bar and shock relocators. Anybody use this stuff and if so how is it?

11-06-2006, 08:50 PM	#1
st1x10 Registered User Join Date: Feb 2006 Location: Oklahoma City Posts: 588	Front and Rear Suspension I was wanted to upgrade brakes and also need new joints on the front. Also will lower the truck at the same time. 3.5" front and 5" rear. Do I need shock relocators, adjustable track bar, and where should I get the stuff?? I was looking at http://www.p-s-t.com/truck/tvfekstd.html for their front end kit 63 -72. Then GMCPauls.com for drop spindles, 5 lug disc brakes, caliper, and springs. Looking at around $1200 for the full setup front and rear if I get adjustable track bar and shock relocators. Anybody use this stuff and if so how is it? __________________ 1970 Chevy C10 "Under Construction" 2002 Chevy S10 V6

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.