The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-16-2006, 03:48 AM   #1
IvelDesigns
Commander Taco Bello
 
IvelDesigns's Avatar
 
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
Post Air Bag Shopping List

i have a 69 lwb that i will be baggin this winter/spring. it was a 3/4 truck, but the PO converted it to 1/2 and put disk brakes up front. I have no clue what year/model was used, so i'm concerned that i might get the wrong spindle.

Anyways, here's my list:

4 Slam Specialties bags - http://*****************/SlamSpecialt...SinglePort.php
Front Plates - http://*****************/67-87Fullsiz...rtBrackets.php
Rear Plates (Do I need these if my coil mounts are good?) - http://*****************/RearUpperBag...SinglePort.php
100' of Air Line (rather have to much than not enough) - http://*****************/100ftof38DOT...cedAirLine.php
4 Gauges - still looking - gonna get something to match whatever i pick for my gauge cluster i'm workin on.
ECC Drop Member - $199
ECC Shock Relo kit with shocks - $199
Panhard Bar - http://*****************/PanhardBarKit.php
C-Notch - From another member
CPP 2.5 inch drop spindles - http://www.classicperform.com/Store/...ruck/CP4S1.htm
CPP Front and Rear Sway Bar Kit - http://www.classicperform.com/Store/...ck/6372SBK.htm
CPP Front Sway Bar Brackets - http://www.classicperform.com/Store/...ck/6372LSB.htm

For the air line fittings, I was planning to order everything from SuicideDoors. For each bag, i think i will need the following, starting from the bag and getting into the cab (http://*****************/Fittings.php):
Forged 90 Degree Elbow Male
Female Connector
line
Male Elbow
Bulkhead - mounted to cab floor/firewall (not sure where yet)
line
Union Tee
line A goes to gauge
line B goes to input valve

I have no clue what i need for valves. I assumed i would have something just like a tire valve where i can add air, or press in the needle to let air out. I didn't see anything like that at suicidedoors though.



So that about wraps up my suspension project. See anything i'm missing or something i should rethink??
IvelDesigns is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com