|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-16-2007, 11:19 AM
|
#1 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Draggn66, RE: door shim dimensions
Attached to this post is a drawing with the dimensions of the upper and lower door shims. We had ours made on a Lazer cutter which worked out well. (Unfortunately the machine is no longer in the state).
We used .100 thick stainless steel but CRS or HRS would work also. We chose the thickness of .100 but other thicknesses of shims could be made. Jim |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode