Think I fried my horn. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chvtrkman · 09-04-2007, 05:20 PM

I was tinkerin' around with the truck earlier. Decided to put on the factory steering wheel that I bought on ebay last winter.My wheel was cracked pretty bad. The old wheel came off easy, installed the new one, put in all the pieces to the horn button and now it doesn't work. I should mention it worked fine before I started all this. Now I can hear the relay click, but that's all. I pulled the wire off the horn itself and ran a test light directly to the battery.It's getting voltage but no sound.

What are the chances the horn finally gave its last honk before I changed the steering wheel?

09-04-2007, 05:20 PM	#1
chvtrkman Registered User Join Date: Sep 2007 Location: PA. Posts: 178	Think I fried my horn. I was tinkerin' around with the truck earlier. Decided to put on the factory steering wheel that I bought on ebay last winter.My wheel was cracked pretty bad. The old wheel came off easy, installed the new one, put in all the pieces to the horn button and now it doesn't work. I should mention it worked fine before I started all this. Now I can hear the relay click, but that's all. I pulled the wire off the horn itself and ran a test light directly to the battery.It's getting voltage but no sound. What are the chances the horn finally gave its last honk before I changed the steering wheel? __________________ _____________________________________________ 69 C-20 292, 4 spd O/D, 4:56 rears. No a/c p/s p/b p/w......restoration project,"Operation:Stovebolt" 78 C-10 305 TH350 new (old) daily driver 02 Suburban Z71 a.k.a. the family truckster 99 Silverado 1500 Z71

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.