FS: Short Fleet Bed-ROUGH but CHEAP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wugunguy · 09-06-2007, 10:08 PM

I have the short fleet bed off my 70 1/2 ton project-Texas truck. It is really rough but maybe someone can use it. both bedsides are dented up bad, no tailgate, front panel has a light bow in it, floor is warped from stuff being loaded in it. The underside is ok. Floor also has some pitting but not much rust. Cross-sills or whatever they are called look good. The bolts that hold it to the frame had to be torched off. Yep, it's rough but cheap--$50.00 takes it. Sorry no pictures, but can get some Monday (Sept 13).

09-06-2007, 10:08 PM	#1
wugunguy 70 C/10-Work in progress Join Date: Aug 2005 Location: Kansas Posts: 601	FS: Short Fleet Bed-ROUGH but CHEAP I have the short fleet bed off my 70 1/2 ton project-Texas truck. It is really rough but maybe someone can use it. both bedsides are dented up bad, no tailgate, front panel has a light bow in it, floor is warped from stuff being loaded in it. The underside is ok. Floor also has some pitting but not much rust. Cross-sills or whatever they are called look good. The bolts that hold it to the frame had to be torched off. Yep, it's rough but cheap--$50.00 takes it. Sorry no pictures, but can get some Monday (Sept 13). __________________ In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.