2wd Blazer *eye Candy*

[Rokcrln]

Originally Posted by raggedjim

Kevin, did you happen to notice how the front fenders bolt on at the cowl? I have thought about smoothing out the cowl to the windshield frame but can't figure out the fender mount in that area.

Thanks, Rg

Yes I talked to the fabricators for a good hour atleast. What they did was welded a stud to the back side of the fender and it now bolts in from inside the cab under the dash. Just do it a way that you can still slide shims in from the door jamb as needed for fender alignment. Set it up so that it needs at least 3/16" worth of shims. You can always pull some out if needed but if you set it up tight and then need to adjust it in you are screwed!

Kevin
LFD Inc.