327 with 700r4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Skirtchaser · 02-12-2008, 11:45 AM

Hi then and hello again,
Well, I've gone and done it again. I picked up a rebuilt 700r4 with the cable kickdown. I dont know why I do these things I just do, then I look to my brothers and sisters on the forum to help me.
What torque plate will fit the late model 327 and bolt up to the 700r4 torque converter?
I know Dans driveline in vegas can make me up a drive shaft.
This combination will go in the yellow 66 on my avatar, as I am DONE with the low first 4 spd. Any one looking for said granny low 4 spd. send me a PM, I'll make you a great deal on the whole shebang brackets, clutch pedal assy., everything.
Here we go again!
Thanks all

02-12-2008, 11:45 AM	#1
Skirtchaser Registered User Join Date: Sep 2007 Location: Kingman, Az. Posts: 27	327 with 700r4 Hi then and hello again, Well, I've gone and done it again. I picked up a rebuilt 700r4 with the cable kickdown. I dont know why I do these things I just do, then I look to my brothers and sisters on the forum to help me. What torque plate will fit the late model 327 and bolt up to the 700r4 torque converter? I know Dans driveline in vegas can make me up a drive shaft. This combination will go in the yellow 66 on my avatar, as I am DONE with the low first 4 spd. Any one looking for said granny low 4 spd. send me a PM, I'll make you a great deal on the whole shebang brackets, clutch pedal assy., everything. Here we go again! Thanks all __________________ http://www.motherroadrods.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.