The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-03-2008, 06:02 AM   #1
eastcoastcivil
Registered User
 
Join Date: Apr 2007
Location: New Brunswick, Canada
Posts: 201
Unhappy 4x4 High Hump Question

I bought a 68 4x4 as my first project without knowing much about them and never really had a chance to work on it until a couple weeks ago. After getting it in the garage and taking a look I realized that the cab is from a 2wd because of the low hump. they cut the hole in the floor for the stick but it is way too small (cab sits on the tranny), this will be an easy fix with a little cutting. The high hump that was in there is obviously from a different truck and has the factory hole for the stick and another hole cut out by the PO for the 4wheel, 2wheel stick. I am actually wondering if this is a 68 tranny at all but more so, does anybody have a pic of the high hump with the 2 holes that they could post for me. Thanks.

More amd more confused everyday.
__________________
If your not living for something, your dieing for nothing...
eastcoastcivil is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:49 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com